1) advance blasting stress relieving method
超前爆破应力解除法
1.
The advance blasting stress relieving method is the effective control method to strong rock burst and extremely strong rock burst.
超前爆破应力解除法是一种针对强岩爆和极强岩爆较有效的防治方法,其钻孔爆破设计还处于经验设计阶段。
2) stress discharging in advance
应力超前解除
1.
Research purpose: In view of the problem of construction time limited and the construction passage limited of underground factory house for Hainan construction project, we bring up a new construction technology-several layers excavating and stress discharging in advance to solve this difficult problem.
研究目的:针对海南工程地下厂房洞室施工项目的工期紧、施工通道受限的问题,本文提出了采用多层耦合应力超前解除法施工技术来克服这一难题。
3) Stress relaxation method
应力解除法
1.
Several rectification methods,including stress relaxation method,additional stress method and ground stiffness softening method,were combining together.
根据Ⅲ级自重湿陷性黄土的特性,对某独立基础的五层框架结构的空旷仓库采用应力解除法、应力附加法和地基土体刚度软化法等综合迫降纠倾技术,使倾斜结构物顺利回倾,倾斜率达到了规范规定的技术要求。
4) stress relief method
应力解除法
1.
Simulation of building rectification by stress relief method;
地基应力解除法纠偏模拟分析
2.
For determining the state of ground stress in the deep mining, the determination of ground stress has been carried out The stress relief method and the triaxiai strain gauge have been used.
为确定井下深部地应力的状态,以便采取必要的措施,进行了地应力测量,所使用的方法是孔壁应变式的应力解除法,使用的仪器是三轴应变计。
3.
An indoor experiment is conducted for rectifying a reduced-scale model of leaned structure on collapsible loess using a synthetic forced settlement method,which integrates stress relief method,additional stress method and ground stiffness softening method according to the properties of collapsible loess.
根据湿陷性黄土的特性,以倾斜结构物的缩尺模型为对象,进行应力解除法、应力附加法以及地基刚度软化法综合迫降纠倾的室内试验研究,对应力解除深度、应力附加值以及刚度软化注水量等纠倾参量依次设计3个水平数,分析和探讨3种纠倾技术的影响因素及其在不同纠倾参量下的纠倾效果和回倾规律。
5) method of stress relieving
解除应力法
6) stress relieving method
应力解除法
1.
The experiment of forced settlement rectification through the stress relieving method is introduced for a reduced-scale model of inclination building.
针对湿陷性黄土地基的特点,对倾斜建筑物的缩尺模型进行了应力解除法迫降纠倾的室内试验,分析了影响回倾的主要因素,研究了模型的回倾规律。
2.
With an engineening example,the principle of stress relieving method,the construction method and rectifying procedure control in longitudinal direction rectification are introduced.
结合工程实例 ,介绍应力解除法纠偏的原理、纵向纠偏的施工方法和过程控制 ,表明了这种方法在软土地区应用的可行
3.
According to the principle of insitu stress measurement with stress relieving method,a method for virgin stress solution based on finite element model was supposed which can be applied to rock mass with nonideal characteristic.
根据应力解除法地应力测量的基本原理 ,提出了可适用于非理想岩性岩体的基于岩体三维有限元模型的地应力求解方法 ,并采用ANSYS程序进行了数值模拟实验。
补充资料：轧辊残余应力(见轧辊应力)
轧辊残余应力(见轧辊应力)
residual stresses in roll
zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条