1) Complex Dual Carving
复杂双曲面
2) complicated surface
复杂曲面
1.
Taking newtype numerical control turntable as the core, a WEDM system for complicated surfaces was developed.
开发了以新型翻转式自动分度数控回转工作台为核心的复杂曲面电火花线切割加工系统。
2.
Aim at the problem of information flow between the reverse engineering software (RE-SOFT) on complicated surface modeling and others commercial CAD/CAM system, a composite triangular Beizer surface reconstructing the quadrilateral NURBS technique based on IGES standard is presented.
针对反求工程中复杂曲面CAD建模专用软件(RE-SOFT)与其他商用CAD/CAM系统间进行信息流动的问题,提出一种面向IGES标准输出的复合三角Beizer曲面重构四边NURBS曲面技术;通过复合三角曲面的特征提取,对三角曲面进行分块、区域边界编辑及相邻区域光滑拼接,进而构造出G1连续的光滑四边NURBS曲面模型并以IGES数据格式传输到其它CAD/CAM系统中进行后续处理,达到了既能充分利用三角曲面的优势又能实现专用CAD软件(RE-SOFT)与其他商用CAD/CAM系统集成的目的。
3.
In order to solve the problem of NC machining programming for parallel machine tool(PMT),implement NC machining of parts with complicated surfaces by PMT,promote the industrialization and practicality of PMT,a 5-UPS/PRPU PMT oriented CAD/CAM integrated system is developed.
为了解决并联机床的数控加工编程问题,实现并联机床对复杂曲面零件的数控加工,推动并联机床的产业化和实用化,开发了面向5-UPS/PRPU并联机床的CAD/CAM集成系统。
3) complex surface
复杂曲面
1.
NC Machining Processes and Programming of the Fitting Parts with Complex Surfaces;
复杂曲面配合件的数控加工工艺分析与编程
2.
Research on Numerical Control Machining of Complex Surface Based on the Cimatron;
基于Cimatron的复杂曲面数控加工研究
3.
Boundary extracting and modeling of complex surface based on CMM;
基于三坐标测量的复杂曲面边界线的获取与构建
4) sculptured surface
复杂曲面
1.
Direct interpolation algorithm for pen-cutting of sculptured surfaces;
复杂曲面笔式加工的直接插补算法(英文)
2.
Direction-parallel machining sculptured surface based on local character;
基于局部特征的复杂曲面零件行切加工
3.
Modeling of virtual environment based on VM to verify sculptured surface NC program verification;
基于虚拟制造的复杂曲面NC程序验证仿真环境的建立
5) complex surfaces
复杂曲面
1.
Intersection algorithm for discrete and complex surfaces of spare parts in engineering machine;
工程机械零件离散复杂曲面求交算法
2.
Study on Calculation Method of Non-interference Cutter Pass for Complex Surfaces with NC Machining;
复杂曲面数控加工无干涉刀位轨迹的计算方法研究
3.
Based on mathematics mod- els of complex surfaces,this paper summarized the types of error in NC machining and analyzed all kinds of error in 3-axis NC machining,especially the generation of non-linear error and factors which influence it.
针对复杂曲面通常采用数控加工方式制造,从复杂曲面的数学模型入手。
6) complex curved surface
复杂曲面
1.
Form-finding technique and structural design of complex curved surfaces in steel structures;
复杂曲面钢结构屋面的数值找形与结构设计
2.
By analyzing various systems of machining complex curved surface by means of wire electric discharge machining (WEDM), the components, motion parameters, motion types and motion rules of the systems are summarized.
分析了能实现复杂曲面加工的各种电火花线切割加工系统的组成、运动参数、运动形式和运动规
3.
A triangular mesh-based new method for reconstruction of NURBS complex curved surface in the reverse engineering was described.
介绍了一种在逆向工程中基于三角域上NURBS复杂曲面重构新方法,并利用在VC环境下逆向工程操作平台与多个软件相结合,从而实现复杂曲面从点云数据到三维实体模型的重构。
补充资料：双叶双曲面
双叶双曲面
two-sheet hyperboloid
r皿ep60”OH口l 见双曲面(11yperboloid)双叶双曲面〔two一叙eth押材加loid;皿。yno月ocTn曰丽
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条