1)  aggregation
团粒化
1.
Laboratory experiments were carried out to investigate the aggregation effect of lime dosage and age on two types of expansive soils treated with slaked lime.
研究了不同灰剂量和龄期对膨胀土"团粒化"作用效果的影响。
2)  aggregate
团粒
1.
Relationship of CaCO_3 and soil aggregates in irrigated soil of the Loess Plateau,China;
黄土高原灌溉农田土壤团粒与碳酸钙关系研究
2.
Discussion on the mechanism of loess collapsibility caused by irrigation from the aggregates stability-losing angle;
从团粒结构失稳角度探讨由灌溉引起的黄土湿陷发生机理
3.
The results showed that much CaCO3 was distributed among loess and its aggregates.
本研究利用能谱分析(EDX)技术对黄土中碳酸钙分布进行研究,其结果表明:在黄土及其团粒中分布着很多碳酸钙,大颗粒碳酸钙数量较少,以镶嵌型分布于矿物颗粒之间;小颗粒碳酸钙数量多,主要以附着型分布在矿物表面。
3)  agglomerated particle
聚集团粒
1.
This paper discusses the influence of different calcining process of the APT is roasted to produce the yellow tungsten oxide on the quality of tungsten carbide powder, investigates the cause from particle size uniformity and the quantity of agglomerated particles and improves the calcining process.
从粒度均匀性和聚集团粒量讨论了APT煅烧成WO3时的煅烧工艺对WC质量的影响,分析了引起WC粒度均匀性和聚集团粒的原因,并提出了较佳煅烧工艺。
4)  agglomeration process
团粒法
1.
Improving and optimizing the technology for production of compound fertilizer by agglomeration process;
团粒法复混肥生产技术的完善和优化
5)  fused salt granulation
熔盐团粒
1.
This article introduces the energy-saving and consumption-reducing measures for fused salt granulation process, spray granulation process and urea solution production process in urea-base compound fertilizer production.
介绍尿基复合肥熔盐团粒、喷浆造粒、尿液联产三项工艺节能降耗及实现无返料、无干燥、无污染特点、界定范围和不同规模装置投入产出比。
6)  bridged particle
桥接团粒
1.
By means of the mercurial barometer and pore size analyzer, the effects of bridged particles on the pore volume distribution in nano-meter cemented carbide powder and its compact were investigated.
(BET)比表面分析和扫描电镜 观察等手段研究了桥接团粒在分离和破碎过程中,相对松装密度和比表面积的变化及高能破 碎对粉末成形致密化的影响。
2.
The specific surface area and green density of ultrafine cemented carbide powders (containing bridged particles) were studied before and after sedimentation separating and high energy shear milling by means of BET specific surface area analyzer and SEM.
采用沉降分离 ,高能剪切粉碎 ,比表面分析 (BET)和扫描电镜 (SEM)观察等手段研究了超细硬质合金粉末中的桥接团粒在分离 ,破碎过程中 ,松装密度和比表面的变化 ,研究和对比了常规湿磨、高速搅拌球磨、高速剪切粉碎对粉末成形致密化曲线的影响。
3.
The results showed that by the new-type high energy shear milling micrometer WO3 powder can be broken, and bridged particles in ultrafine W powder can be cracked, with the apparent density of W and WO3 powders doubling, but without much influence on their specific surfac.
结果表明:新型剪切破碎机能有效地粉碎微米级WO3等脆性粉末,同时可以破坏超细W粉中的桥接团粒,使W粉和WO3粉的松装密度增加1倍以上,但对比表面积影响不大。
参考词条
补充资料:公理化方法(见公理化和形式化)


公理化方法(见公理化和形式化)
axiomatical method

  gongllbuafangfa公理化方法化和形式化。(axiomatieal method)见公理
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。