说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 地震监测环境
1)  Earthquake monitoring environment
地震监测环境
2)  seismic observation environment
地震观测环境
1.
This article proceeds with the concept of seismic observation environment, defines the protection domain of seismic observation environment; explains the importance of seismic observation environment protection and the current situation, and at last provides suggestions on how to strengthen the seismic observation environment protection.
本文从地震观测环境的概念入手,具体阐述了地震观测环境保护范围的划定;地震观测环境保护的重要性、现状以及加强地震观测环境保护的建议。
3)  wetlands environment monitoring
湿地环境监测
4)  wetland water quality monitoring
湿地水环境监测
1.
A survey of the up-to-date methods and technologies of wetland water quality monitoring is presented.
对湿地水环境监测技术的研究现状与进展进行了概述。
5)  Seismic Environment
地震环境
1.
A procedure is developed to incorporate seismic environment and site condition into the framework of seismic vulnerability estimation of building to consider the effects of the severity and/or frequency content of ground motion due to seismic environment and site condition.
提出了一种综合考虑地震环境和场地影响的钢筋混凝土房屋地震易损性分析方法。
2.
<Abstrcat> the seismic environment and engineering condition around the site of Mobile Communication Center in Shandong Province are briefly introduced.
简要介绍了山东移动通信枢纽工程场地所处的地震环境、历史地震影响以及工程场地条件,利用地震危险性概率分析方法确定了50年超越概率为63%、10%和2%时工程场地平均土条件下的地震烈度、基岩地震动参数,并依据一维剪切波理论进行了场地地震反应分析,得到了具体的抗震设计参数。
6)  seismic monitoring
地震监测
1.
Forward modeling of time-lapse seismic monitoring for thermal recov-ery in heavy oil reservoirs.;
稠油热采时移地震监测正演模拟分析
2.
Study and application of time-lapse seismic monitoring for the thermal recovery of heavy oil reservoir;
稠油热采时移地震监测研究与应用
3.
Application of elastic impendence inversion in seismic monitoring of the heavy-oil thermal recovery;
弹性波阻抗反演在稠油热采地震监测中的应用
补充资料:爆破地震监测


爆破地震监测
monitoring and measuring blasting vibration

baoPo dlZhen Jlanee爆破地震监测(monitoring and measuringblasting vibration)应用仪器测量爆破地震振动参量,同时对震害作宏观调查的过程。监测目的是了解爆破地震强度及其危害程度,方法有仪器测量、宏观调查及综合监测。完善的爆破地震监测是保证爆破安全的手段之一。 仪器测量在爆破地震有效作用范围内,布置若干测点,以测量地面运动参数,并记录波形。测量系统由传感器、记录仪、数据处理设备组成。爆破振动测试所用传感器,多为机电式或压电式结构,将被测对象的振动信号转变为电信号输出。按用途分为拾震仪、强震仪和加速度计。中国常用的传感器的主要性能见表。记录仪有光线示波器、磁带记录仪和微机控制的记录分析仪三类。光线示波器已不多用,磁带记录仪有模拟式和数字式两种,均便于同微机连接进行数据处理,模拟磁带记录仪价格便宜,操作简单,维修方便,性能指标基本符合量测要求,使用较广。数字磁带记录仪具有动态范围大、线性好,通频带宽等优点,但价格昂贵。微机数字仪有整机和组合式两种,能适时处理数据,准确、迅速、功能齐全,是记录仪器的更新换代产品,但价格也较贵。流动测量以选用磁带记录仪为好,固定测量以选用微机数字仪为好。测量系统应定期进行标定,标定在振动台上进行,在振动台台面上固定标准传感器和被校传感器,在适当的频率下进行振动,测量两个传感器的输出之比,比值即为系统的灵敏度。 爆破振动测试用传感器主要性能表又二 测量方法直接影响测量效果和数据的应用价值。由于安全振动速度是一种统计性的安全判据,观测必须有一定次数和较大范围,以判定测量数据的实用价值。首先要合理设置测点,一般不少于6个,第一个在爆源附近,最后一个布置在被测对象稍远处。测点间要有一定距离,按离爆源近远不同,测点间距离为2。一IOOm。露天矿山宜布置在爆区后方30~60Om范围内。当爆区邻近边坡时,应在边坡不同高度台阶上设点。对于多层房屋,宜在不同楼层上设点,以便于分析结构的动力反应。在地下巷道中可将拾震仪固定在巷道底板上。其次按安全规范的要求选定测量速度或加速度,直接测量所需的振动参量。原则上每个测点应同时测量三个正交分量,由于三个正交分量并非同时达到最大值,为节约费用,依据安全规范的要求,也可只测其中的一个分量。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条