1) consistent tangent stiffness
一致切线刚度
2) consistent tangent modulus
一致切线刚度矩阵
1.
Research on consistent tangent modulus for unified viscoplastic constitutive equations;
统一粘塑性本构方程一致切线刚度矩阵的研究
3) tangent stiffness
切线刚度
1.
An element tangent stiffness equation was derived based on the secant stiffness equation of stability function elements with shear deformation effects considered.
以考虑剪切变形影响的稳定函数单元的割线刚度方程为基础,导出了单元切线刚度方程。
2.
The derived nonlinear secant and tangent stiffness matrices are the simple summation of linear stiffness matrix and nonlinear matrices.
采用三次多项式分段模拟混凝土、钢筋和型钢材料的非线性本构关系 ,以平截面假定为基础 ,推导出双向偏压钢筋混凝土、钢骨混凝土及钢 -混凝土组合构件截面非线性分析通用公式 ,得到的截面割线、切线刚度矩阵是线性与非线性刚度矩阵的叠加。
3.
Based on the actual shape of stayed cable, the tangent stiffness is derived.
基于斜拉索实际索形 ,推导了索的切线刚度 ,并与Ernst等效弹性模量方法作了对比分析。
4) consistent-stiffness matrix
一致刚度矩阵
1.
The consistent-stiffness matrix and consistent-mass matrix also have been established which considered joint rotation.
将悬挂结构简化为串并联模型,建立考虑节点转动的一致刚度矩阵和一致质量矩阵建立结构的总刚度矩阵和总质量矩阵,通过简化得到结构的竖向刚度矩阵和相应的质量矩阵,并进行了竖向振动下的模态分析,从中得出了悬挂结构竖向振动的一些特征与结论。
5) consistent tangent operator
一致切线算子
1.
A Consistent Tangent Operator Based Boundary Element Method for Design Sensitivity Analysis;
用于设计灵敏度分析的一致切线算子弹粘塑性边界元方法
2.
This paper presents a consistent tangent operator(CTO) concept-based boundary element implicit algorithm for elasto-viscoplastic sensitivity analysis.
基于一致切线算子概念的弹粘塑性隐式边界元方法,进行了弹粘塑性设计灵敏度分析。
6) tangent stiffness matrix
切线刚度矩阵
1.
New tangent stiffness matrix for geometrically nonlinear analysis of space frames;
一种用于空间框架结构几何非线性分析的切线刚度矩阵(英文)
2.
Principle of stationary incremental potential energy and formation rules of tangent stiffness matrix;
势能增量驻值原理与切线刚度矩阵的解构规则
3.
In order to solve the problem of rigid anchor connection when using catenary cable element, based on the tangent stiffness matrix of two-node catenary cable element deduced with catenary equations, a more exact expression of tangent stiffness matrix is derived for two-node catenary cable element with arbitrary rigid arms.
为解决应用悬链线索元时锚固点的刚性连接问题,在应用悬链线基本方程导出的两节点悬链线索元的切线刚度矩阵基础上,推导出两端带任意刚臂的两节点精确悬链线索元的切线刚度矩阵显式表达式,并且分析了考虑索元初次张拉和成形使用两种条件下切线刚度矩阵的迭代求解技术。
补充资料：JPZ型三向等刚度橡胶减震器
分子式：
CAS号：
性质：JPZ-type tridirective equal rigid rubber mounting 橡胶减震器的一种。具有x、y、z三个方向等刚度、等自震频率。按负荷大小可分为JPZ-1、JPZ-2两种型号。由中央金属芯柱、伞形金属罩及橡胶连接而成，模压法生产。可满足导弹控制仪等设备的隔震和抗冲击要求。
CAS号：
性质：JPZ-type tridirective equal rigid rubber mounting 橡胶减震器的一种。具有x、y、z三个方向等刚度、等自震频率。按负荷大小可分为JPZ-1、JPZ-2两种型号。由中央金属芯柱、伞形金属罩及橡胶连接而成，模压法生产。可满足导弹控制仪等设备的隔震和抗冲击要求。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条