说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 入侵检测性能
1)  Intrusion Detection Performance
入侵检测性能
2)  MIS intelligent intrusion detection
MIS智能入侵检测
1.
In this paper, there is a brief introduction to the MIS intelligent intrusion detection technology by using neural networks, and by use of the new cluster to improve the neural network, Rules adopted by the best time of the algorithm to reduce complexity and simplify the neural network.
该文对采用神经网络实现的MIS智能入侵检测技术进行了简单介绍,并使用新的聚类方法来改善神经网络,通过得到最佳的规则数降低了算法时间复杂度,简化了神经网络。
3)  Intelligent Intrusion Detection
智能入侵检测
1.
Intelligent Intrusion Detection Model Based on Information Gain Bayesian Network;
基于信息增益—贝叶斯网络的智能入侵检测模型的研究
2.
The parameter of traditional intelligent intrusion detection can not modify basis on studied model.
传统智能入侵检测模型参数的修改只能通过对训练集重新学习,从而导致模型的适应性较低,利用朴素贝叶斯模型具有增量式学习特征,通过对新训练集进行训练进而修改模型参数,从而提高模型的自适应能力。
4)  intrusion detection
入侵检测
1.
Adaptive intrusion detection algorithm based on rough sets;
基于粗糙集的自适应入侵检测算法
2.
An adaptive intrusion detection system based on data mining;
基于数据挖掘的自适应入侵检测系统
3.
Shallow talk to intrusion detection technology and its development;
浅谈入侵检测技术及其发展
5)  invasion detection
入侵检测
1.
This paper introduces the concept and classification of invasion detection and analyses merits and defects of invasion detection s method.
文中介绍了入侵检测技术的概念、分类,并分析了此检测方法的优点和不足之处,最后描述了它的发展趋势。
2.
On the base of the characteristic of modes of anomaly-based and signature-based, a network invasion detection system is proposed to use the virtue of two modes to detect network invasion.
针对异常发现技术和模式匹配技术各有利弊的特点 ,设计了将这两种技术综合运用的网络入侵检测系统 。
3.
As the core module of invasion detection system,detection engine generally uses the methods based on pattern matching.
检测引擎作为入侵检测系统(IDS)的核心模块,基本上采用基于模式匹配的检测方法,选择设计1个好的模式匹配算法对入侵检测系统的性能至关重要。
6)  intrusion detection system
入侵检测
1.
A mobile-agents-based distributed intrusion detection system;
基于Mobile Agents的新型分布式入侵检测系统
2.
FPGA-based Pattern Matching for Network Intrusion Detection System;
入侵检测中模式匹配算法的FPGA实现
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条