说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 城市给水处理厂
1)  urban water treatment plant
城市给水处理厂
2)  municipal sewage treatment plant
城市污水处理厂
1.
It is hoped to provide basis for the future research and process design of odor control in other municipal sewage treatment plant.
本文介绍了其工作原理、工艺特点、影响因素以及国内外应用现状及其局限性,希望对于我国其它城市污水处理厂除臭系统的建设起到借鉴作用。
2.
Based on the effect of odor from the municipal sewage treatment plant on the surroundings, brings forward the concept of the acceptance of atmosphere quality.
针对城市污水处理厂的臭气对周围区域的影响问题,提出了大气质量可接受性的概念,分析比较了臭气的检测技术,认为采取水气分离、将臭气源密封、保持负压、集中处理、高空排放的办法切实可行;同时建议制定臭气控制政策并应综合考虑不同因素。
3.
Aimed at the problems rising from the municipal sewage treatment plant on the environment pollutions and the increasing residents complaints and the damage to worker health,analyses the forming mechanism of odor in sewage processing together with the close correlation of odor forming and sewage treatment process,from which brings forward the concept of odor process control.
针对城市污水处理厂恶臭气体所造成的环境污染、居民抱怨以及对职工健康造成损害等一系列问题,分析了城市污水处理厂恶臭气体的形成机理及恶臭气体与处理工艺过程的紧密相关性,并在此基础上提出了全过程控制的理念;同时为将国内停留在实验室研究阶段提升到工程应用程度,文中辅以实例对现场试验研究进行了概述。
3)  municipal wastewater treatment plant
城市污水处理厂
1.
Policy analysis for sludge treatment and disposal in municipal wastewater treatment plant;
城市污水处理厂污泥处理处置的政策分析
2.
Economical criterion of urban municipal wastewater treatment plant's layout optimization
城市污水处理厂布局优化的经济性判据
3.
Combining with sludge reduction,stabilization and change for harmlessness and usefulness,this paper summarized the main theory and techniques of sludge treatment and disposal in municipal wastewater treatment plant at present.
结合污泥的减量化、稳定化、无害化和资源化,综述了目前国内外城市污水处理厂污泥处理处置技术的主要理论和方法。
4)  urban sewage treatment plant
城市污水处理厂
1.
Comprehensive Evaluation Model of Urban Sewage Treatment Plant;
城市污水处理厂综合评价模型的研究
2.
Research on energy optimizing mathematical model of urban sewage treatment plant
城市污水处理厂能耗优化的数学模型建立
3.
The selection of process programs is one of the most important steps in the construction of the urban sewage treatment plant, it plays a determinant role in the investment cost running cost effluent effect operation and management of the urban sewage treatment plant.
工艺方案选择是城市污水处理厂建设中最重要的步骤之一,它对城市污水处理厂的投资费用、运行费用、出水效果、操作管理等起着决定性作用。
5)  urban wastewater treatment plant
城市污水处理厂
1.
Comparative study on resource allocation efficiency of urban wastewater treatment plants in China.;
中国城市污水处理厂资源配置效率的比较
2.
On the principle of non-dispersible infrared absorption (NDIR) method for determination of total organic carbon (TOC), the TOC-5000A analyzer (solid sample burning device SSM-5000A is appended) was used to determine TOC content in dewatered sludge of urban wastewater treatment plant.
依据燃烧氧化—非色散红外吸收法(NDIR)测定总有机碳(TOC)的原理,采用岛津TOC-5000A总有机碳分析仪(附固体样品燃烧装置SSM-5000A)测定了城市污水处理厂脱水污泥中的TOC含量。
3.
The present status of Chinese urban wastewater treatment plants are introduced in detail as well the existing problems.
通过对我国城市污水处理厂发展概况的介绍和当前我国城市污水处理厂的现状分析,指出了存在的问题,并提出了相应的对策和措施,为我国城市污水处理相关研究提供基础和借鉴。
6)  sewage treatment plant
城市污水处理厂
1.
Investigation on the estrogenicity of different processes in a sewage treatment plant
城市污水处理厂各工艺阶段内分泌干扰物活性变化规律研究
2.
The sources,sorts,concentration,production and harm of odor dissolved in water and in the state of air phase coming from sewage treatment plant are introduced.
介绍城市污水处理厂恶臭污染来源、发生条件及危害。
3.
The optimal comprehensive benefit is the objective of sewage treatment plant processes optimizing design.
城市污水处理厂工艺设计优化是以综合效益最优为其设计的目标。
补充资料:给水处理厂
      将原水进行处理以达到用水水质要求的工厂。供应城市用水的给水处理厂,有时称为自来水厂或简称水厂。在工业企业内部的,常称为给水站。
  
  给水处理厂由泵房、化学剂投加设备、水处理构筑物、储存成品水的清水池以及化验室等建筑物所组成。水处理构筑物是改善水质的主要设施。采用的处理过程和构造形式是由原水和供水水质以及当地工程状况和经济条件决定的。以去除悬浮杂质为主的水厂,一般采用混凝、沉淀、过滤和消毒的处理工艺。原水进入水厂后投加混凝剂并迅速混和,接着缓慢搅动水流,使混凝剂产生的反应物和悬浮杂质结成容易沉降的絮状颗粒,在沉淀池中和水流分离。水流再经过滤,即清澈可用。混凝沉淀和过滤虽能消除一部分微生物,但远不能达到生活饮用水的细菌标准。在城市水厂和供生活用水的给水站,水流进入清水池时,还须投加消毒剂,进行消毒。沉淀和过滤中分离出来的污泥要妥善处理和处置以免污染环境。
  
  当原水浊度较低时(如湖水),水厂流程可以从简,原水投加混凝剂后可直接过滤,省去絮凝和沉淀。如原水浊度较高或含沙较多时,则需增加预处理,去除易沉颗粒。当原水水质特殊,典型的处理流程(见图)不能使成品水质量达到要求时,还需针对水质选用其他处理过程,如曝气、除铁、除锰、预氯化(除色、臭)、气浮(除藻)、软化(见水的软化)、活性炭吸附(去除有机物)以及咸水淡化和水质稳定处理(控制水垢及腐蚀见沉积物控制、腐蚀控制)。
  
  
  为了保证生产安全,控制运行指标和经济调度,水厂和给水站开始采用自动化装置和电脑控制。包括①水质、水量、水压(出厂管和配水管网)、清水池水位以及电源电压等运行参数的遥讯、遥测、记录和报警;②药剂投加量、阀门启闭和水泵机组调节的自动控制和遥控。
  
  给水处理厂的位置,应以整个给水系统综合考虑。一般选在工程地质条件较好,周围卫生条件符合防护规定和靠近电源的地方。当水源和供水区距离较远而用水量变化较大时,一般选在用水区域附近。(见彩图)
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条