1) curve form error
曲线形状误差
1.
This dissertation mainly discussed the research on the theory of Genetic algorithms based on real encoding, the application of Genetic algorithms at function optimization, and the computation of simply form error, flat curve form error, complex surface form error.
论文对基于遗传算法的形状误差计算进行了系统的深入研究，重点包括实数编码遗传算法理论研究；遗传算法在函数优化方面的应用研究：基于遗传算法的基本几何形体的形状误差计算：基于遗传算法的平面曲线形状误差计算；基于遗传算法的复杂几何形体的形状误差计算。
2) complex flat curve form error
平面复杂曲线形状误差
3) curved surface shape error
曲面形状误差
1.
In this paper, the conception of the curved surface shape errors and curved surface offset errors of network output functions is presented.
文中首先提出了网络输出函数的曲面形状误差和偏移误差的概念 ,并将指导网络训练的平方和误差分解为这两种误差 ,进而分析了这两种误差的主要特性 ,给出了导致现有算法网络训练效率低的主要原因 ,最后提出了新的网络训练误差模型和具体的网络训练算法 。
4) Straightness error
直线形状误差
1.
By means of the redundant combination and unconventional sequential recursion on the outputs from four probes arranged in special intervals, straightness error of the workpiece and linear error motion of the worktable can be obtained quickly and accurately.
提出了一种新的时域乱序四点法直线误差分离技术 ,它通过对 4个特定布置传感器的输出数据进行冗余组合和乱序递推 ,能快速精确地分离出工件的直线形状误差和工作台的直行误差运动 。
5) error curve
误差曲线
1.
The theoretical errors between the beeline method and the design equation were calculated by using Matlab mathematic software,the error curve was drawn,the errors between two design methods were analyzed and discussed.
利用Matlab数学计算软件,对流浆箱锥形布浆总管采用直线法和设计计算公式的理论误差进行了计算并绘制出误差曲线,以此对2种设计方法之间存在的误差进行了分析和探讨,并结合工程实例对得出的优化方案进行了验证。
2.
It is to measure error and error curve of gear′s major specifications, using modularized designing soft ware system and gear′s composition measuring instrument of computer controlling.
提出采用模块化设计软件系统，配用微机控制的齿轮综合测量仪，测出齿轮主要项目的误差和误差曲线的方法，可大大提高测量精确度，效率和可靠性。
3.
The optimum scheme of steering trapezium of four-wheel vehicle is investigated, the steering trapezium is optimized by using three kinds of optimum schemes, a parametric optimum program is developed, the approximation error curves of various schemes is put forward, the optimum results are compared.
对轮式车辆转向梯形优化方案进行了研究,用三种方案对转向梯形进行了优化,编制了参数化的优化程序,给出了各种方案的逼近误差曲线,将优化结果进行了对比。
6) error-parameter curve
误差-曲线
补充资料：Hesse曲线(代数曲线的)
Hesse曲线(代数曲线的)
Hessian (algebraic curve)
11油限曲线(代数曲线的)【H台自11(.妙如允.抖e);recc咖，T~aaa，即r药pa一吸ee二o‘二p.助蓝] n次代数曲线(司罗玩水c~)的He丈祀曲线就是其极二次曲线能分裂为两条直线的点的集合，也是第一极曲线的二重点构成的集合.n次非奇异曲线的He丈七曲线是一条次数为3伪一2)、类为3(n一2)(3n一7)的曲线.设介O是这条n次曲线的齐次坐标方程，关丘=刁:f/刁xi刁、，则它的He丈犯曲线的定义方程为 !不:关:五，} }五:关:五31=0. }人，人2人3}特征不等于3时的三次非奇异曲线的H既七曲线与这条曲线交于9个通常拐点.因O.H改e(l 844)而得名. A .E.H困阳。B撰
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条