1) polishing remove rate
抛光去除率
2) Theoretical material removal function
抛光去除模型
3) photolysis removal rate
光解去除率
1.
The photolysis removal rates of easy released cyanide in wastewater are 50.
4h,可光解氰化物完全降解时间为 3d;废水中易释放氰化物的光解去除率可达50。
4) cleaner and polish
去污抛光剂
5) removal efficiency
去除率
1.
The toluene removal efficiency 90% was obtained when specific energy input,electrode gap distance,electrode thickness,gas flow rate,inlet concentration of toluene were 0.
为了研究滑动弧放电等离子体对挥发性有机物的净化效果,选取甲苯作为代表物质进行实验研究,观察了电极间隔、电极材料、电极厚度、氧气含量、水汽含量、气流温度、污染物质量浓度等参数对去除率的影响。
2.
Results indicated that application of CGA joined with the general column flotation can make the final removal efficiency of Cu(.
用阴离子表面活性剂十二烷基硫酸钠(SDS)制备胶质气体泡沫并将之引入浮选柱,以胶质气体泡沫为浮选载体并通入常规浮选气泡对预先装入浮选柱的模拟含Cu(Ⅱ)废水进行浮选分离实验,考察了pH值、铜离子初始浓度、SDS用量和絮凝剂的添加对Cu(Ⅱ)去除率的影响。
3.
The removal efficiency is 97.
h-1时,去除率可达97。
6) removal rate
去除率
1.
A research on the effects of COD/SO_4~(2-) ratio to sulfate removal rate;
COD/SO_4~(2-)比值对硫酸盐去除率影响的研究
2.
Study on analysis method and removal rate of the pesticides residue in vegetables
蔬菜中农残分析方法及残留农药去除率的研究
3.
When treating automotive exhaust by the dielectric-barrier discharge reactor with modified fly ash pellets bed as catalyst,the removal rates of NO,HC and CO under different pulsed voltage,pulsed frequency,discharge space and gas flow are investigated.
针对汽车尾气防治,自制了介质阻挡放电催化反应器,并以改性粉煤灰小球为催化剂对汽油机尾气进行处理,研究了脉冲电压、脉冲频率、放电间隙及气体流量qV等对NO、HC和CO去除率η的影响。
补充资料:恒定材料去除率是硬铣的关键
图1:摆动铣削的应用可以产生比较恒定的刀具负载水准。 | |
图2:对于相同的切深,刀具咬合方面的差异可能改变刀具负载和表面粗糙度。 |
刀具路径调整
对较小刀具的编程
刀具咬合
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条