说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 深井动压回采巷道
1)  deep gateway under dynamic pressure
深井动压回采巷道
2)  deep roadway under dynamic pressure
深井动压巷道
1.
Traditional methods of forecasting displacement of rockstrata around deep roadway under dynamic pressure are mainly: analytical method,numerical analytical method,regressive analytical method,probabilistic analytical method,fuzzy analytical method,etc.
传统的预测深井动压巷道围岩移近量的方法主要有:解析法、数值分析法、回归分析法、概率分析法、模糊分析法等。
3)  deep gateway
深部回采巷道
1.
Aiming at the characters of nonlinear mechanical process for surrounding rock in deep gateway excavation and support,the space-time action rule of bolt-net-anchor coupling support is researched by numerical simulation method and engineering application.
研究结果表明,在巷道实施锚网耦合支护后,在围岩剧烈变形阶段结束或临近结束的时间施加锚索关键部位耦合支护,是实现锚索与锚网和围岩之间时空耦合的最佳二次支护时间,其主要特征是通过锚索调动深部围岩强度实现巷道围岩高应力向低应力的转化;同时,实施锚网索耦合支护的深部回采巷道能够满足巷道掘进与工作面回采期间的稳定性控制要求。
4)  deep mine roadway
深井巷道
1.
With the non-line finite element method, the numberical value calculation on the stress and deformation of surrounding rock of deep mine roadways has been presented.
采用非线性有限元法,对深井巷道围岩应力及变形状态进行了数值计算。
5)  Deep roadway
深井巷道
1.
Nowadays support technology in deep roadway is an important topic and this paper analyses stable factors and example of deepoadway and achieves some effects.
深井巷道支护是当前重要的研究课题,本文就深井巷道稳定的因素、实例进行分析,并取得了一定的效果。
6)  roadway in deep mine
深井巷道
1.
For researching supporting technology problems of deep roadway,Continuity mechanics was applied to analyzing stability of roadway in deep mine by comprehensively analyzing status quo of supporting deep roadway and elastic and plastic displacement of surrounding rock of roadway were calculated.
为了研究矿井深部巷道支护技术问题,综合分析了深井巷道支护现状,采用连续介质力学的方法对深部巷道稳定性进行了分析,计算出巷道围岩弹性位移和塑性位移,结合具体工程实际,采取联合支护措施,实现了深部回采巷道的安全、高效运行,为深井巷道支护提供有益参考。
补充资料:冲击波超压与动压

[解释]:  核爆炸产生的高温、高压火球膨胀,在周围介质中形成连续向外传播的压力脉冲(或冲击波),冲击波阵面传播到空间某点时,超过周围环境大器的压力称超压;空气粒子高速随波阵面运动产生的冲击压力称动压。超压和动压都以帕斯卡(Pa)为主单位。超压随时间的变化取决于爆炸威力、距爆点的距离和爆心周围的介质情况。特定地点的峰值超压一般出现在冲击波阵面到达该点的瞬间,超压在该点的持续时间称为正压作用时间。尔后,该点的压力下降到低于周围压力,称为负压,再逐渐回升到周围压力值。对人员的直接冲击伤,超压为20—29千帕可引器轻度伤;29—59千帕可导致中度伤;59—98千帕可造成重度伤;大于98千帕可造成极重度伤。动压为10—20千帕可造成中度伤;20—39千帕可造成重度伤;大于39千帕可造成极重度伤。动压的推动、抛掷和超压的挤压会造成物体变形和毁坏。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条