1) In Situ Gelling
原位凝固技术
2) original position solidification
原位凝固
1.
The results showed that the pore diameter distribution of the green body made by original position solidification method was more uniform and the shape was more regular than that made by dry pressing and dip casting.
研究发现:用原位凝固工艺获得的素坯比用干压和注浆成型的素坯孔径分布更加均匀、具有单峰性,孔洞形状规则。
2.
The result showed that the pore diameter distribution of the original position solidification green body was more well than dry pressing and dip casting and the distribution peak was only one, moreover, the shape of pore was more regular.
研究发现 ,用原位凝固工艺获得的素坯比用干压和注浆成型的素坯孔径分布更加均匀 ,具有单峰性 ,孔洞形状规则。
3) solidifying technique
凝固技术
1.
In this paper,it introduced the existing condition of the alloying and the solidifying technique for NiAl intermetallics,and the effect of the alloying on plasticity,ductility and strength of NiAl,and discusses the effects of directional solidification,common casting and single crystal technique on strength of NiAl.
本文介绍了金属间化合物NiAl的合金化与凝固技术的研究现状。
2.
Alloying and solidifying techniques of NiAl intermetallic were presented and reviewed.
详细介绍和评述了金属间化合物NiAl的合金化与凝固技术的研究现状,并重点介绍了合金化对NiAl合金的塑性、韧性和强度的影响,以及定向凝固、普通铸造和单晶制备技术对NiAl合金强韧化的影响。
4) in situ methods
原位技术
5) consolidation in-situ forming
原位凝固成型
1.
A new consolidation in-situ forming process for high-performance aluminium oxide ceramic using starch as the consolidator/binder was investigated.
为获得以淀粉作凝固剂原位凝固成型氧化铝高性能陶瓷的方法,文中探讨了酯化淀粉添加量对陶瓷浆料流变特性以及成型出的素坯的线收缩、密度、干坯强度和显微结构的影响。
6) in situ crosslinked hydrogel
原位固化凝胶
补充资料：定向凝固技术
定向凝固技术
directional solidification tech-nololgy
定向凝固技术direetional Solidifieation teeh-nololgy使浇入铸型中的金属液在很高的温度梯度和严格控制的单向传热条件下，于某一型壁上开始成核，并沿其垂直方向凝固而生长成平行的柱状晶组织的铸造方法。保温盖感应圈玻璃布保温层石果套模壳挡板冷却圈结晶器出水 ┌─────────┬─────┐ │十::.·…、、 │产...、刹 │ ┌─┼─┬──┬───┬┴─────┼──┬───┐│! │ │[ │j │耐 │…l │开习 ││ │ │ │) │ │ ├───┤│ │ │ │ │ │ │套- ││ │ │ │ │ ├──┼───┤│ │ │ │ │ │藻 │甲--~ ││ │ │ │ │ │ ├───┤│ │ │ │ │ │ │月气 ││ │ │ │ │ │ ├───┤│ │ │ │ │ │ │昏 ││ │ │ │ │ │ ├───┤│ │ │ ├───┤ │ │阵，1 ││ │ │ │ │ │ ├───┤└─┴─┼─┬┴───┴──────┤ │尸. │ │又│ └──┴───┘ │} ├───┐ ┌───┐ │ │卜一州│ │ │ │ │ │ ├───┤ │ │ │ │l习 │ ├─┴───┤ ├───┤ │〕 │ │一__( │ │〕 │ │进水迁│ ├─────┤ ├───┤ │T.一门 │ │—’1 │ └─────┘ └───┘ 铸型移出法定向凝固装置 在定向凝固过程中，获得单向凝固生长的柱状晶的基本条件是，避免在固液相界面前方的液体中萌生新的晶核及其长大。定向凝固柱状晶的装置如图所示。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条