1) weight reduction velocity
碱减量速率
2) base deweighting rate
碱减量率
1.
The result showed that the con- centration of the penetrant had the greatest influence on the base deweighting rate of the blend fiber,and the subsequent order of these influential facto.
结果表明：渗透剂浓度对共混纤维碱减量率的影响最大,其次分别是NaOH浓度、水解时间、处理温度。
3) Rate of the decay of radiated energy
能量衰减速率
4) alkali deweighting
碱减量
1.
Analysis on factors influencing Alkali Deweighting of T/C fabric;
影响涤棉织物碱减量因素分析
2.
The experiments have proved that alkali deweighting pretreatment can significantly improve thebreathability of the fabric but at the same time decrease the breaking strength.
研究了细旦涤纶仿真丝绸的前处理和后整理对织物透气性的影响,实验证明织物经碱减量前处理后透气性提高,但随之断裂强力也下降,在保证一定强力的前提下选择碱减量工艺。
3.
The influences given by process parameters of presetting and alkali deweighting on the fabric strength,elongation and bending rigidity are discussed and analyzed on the basis of experiment.
通过试验分析探讨了预定型和碱减量各工艺因素对于织物的断裂强度、断裂伸长和弯曲刚度等方面的具体影响。
5) alkali weight reduction
碱减量
1.
The best processing condition of micro porous fiber in acid-processing and alkali weight reduction processing had been studied.
研究了微孔纤维成孔的最佳酸处理工艺条件和微孔纤维碱减量处理工艺。
2.
At the same process conditions they were applied with other quaternary ammonium salt surfactants as catalyst promoters in alkali weight reduction treatment of polyester and weight reduction results were analyzed and compared.
在相同工艺条件下 ,将它们和不同类季铵盐表面活性剂作为碱减量催化促进剂对涤纶进行碱减量处理 ,并分析比较了减量的结果。
6) base reduction
碱减量
1.
Research on base reduction of fire retardant polyester fiber fabrics;
阻燃聚酯纤维织物的碱减量处理研究
补充资料：偏应变速率张量
偏应变速率张量
deviator strain rate tensor
P lonyingbion suIU zhongl旧ng偏应变速率张量(deviator strain ratetensor)从应变速率张量中扣除球应变速率张量所剩余的应变速率张量。偏应变速率张量是二阶对称张量，它具有二阶对称张量的一切性质。偏应变速率张量可表示成 f后，.云、，云，，飞(后，一云_云、_云__飞截，~}肠心肠}一!‘，几一‘，气f L气忿￡，ez)L几二￡〕心气一几)对于主应变状态，偏应变速率张量为 {已、00)f云1一式00) ev，一10的O}~}oc:一几O} L 00￡，3 J t 00￡3一气{偏应变速率张量也存在三个张量不变量，其表达形式与偏应变张量的不变量相同，即表达式中以偏应变道率分量代替偏应变分量。 (王振范)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条