说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 高速走丝电火花线切割机
1)  High-speed WEDM
高速走丝电火花线切割机
1.
In this paper the CAD/CAM programming software in High-speed WEDM by using object orient programming (OPP) and the principles & metho.
高速走丝电火花线切割机是我国独创的电加工设备,它结构简单,价格低廉,节约使用成本,是我国产量最大、应用最广泛的机床种类之一。
2)  High-speed WEDM
高速走丝电火花线切割
1.
Reason and Prevention of Wire Wear in High-speed WEDM Process;
高速走丝电火花线切割加工中丝损的原因与预防
2.
The phenomena of wire rupture and wire nipping in the process of high-speed WEDM and the relevant factors causing wire rupture are analyzed.
分析了在高速走丝电火花线切割加工中出现的各种断丝、夹丝现象,以及影响断丝现象的相关因素,提出了预防断丝故障的措施和对策,对进一步提高高速走丝电火花线切割加工质量,完善和改进加工方法具有一定意义。
3)  WEDM-HS
高速走丝电火花线切割机床
1.
Current Status and Prospects of WEDM-HS Reliability Researching;
高速走丝电火花线切割机床可靠性研究现状与展望
4)  HS-WEDM
高速快走丝电火花线切割
1.
The research on HS-WEDM`s short-circle revering based on controlling by SCM;
高速快走丝电火花线切割机床短循环方式的研究与应用
2.
On the base of the vast related literatures and experience,the paper analyzes the feasibility of reducing surface roughness by the way of HS-WEDM s short-circle reversing.
本文在总结实践和参考大量文献的基础上提出了利用往复循环走丝方法,以降低高速快走丝电火花线切割机床加工工件的表面粗糙度值;并用单片机实现了相应的控制,完成了控制线路电路板设计和制作,利用控制电路对现有线割机床进行了改造。
5)  HSWEDM
高速走丝电火花线切割加工
1.
Improving the Cooling Status in Gap About HSWEDM;
高速走丝电火花线切割加工极间冷却状态的改善
2.
This paper investigates the high speed wire electrical-discharge machining(HSWEDM) of Si3N4-based ceramics by assisting electrode method.
通过辅助电极利用高速走丝电火花线切割加工的方法对绝缘陶瓷氮化硅作了加工实验研究。
3.
Analysis of the basic reason of embarrassing the machining indexes of high speed electrical-discharge machining(HSWEDM)and generating black and white crossing stripe on surface at present is washing ability of cooling liquid from the view of discharge mechanism.
从极间放电机理的角度分析了阻碍高速走丝电火花线切割加工(HSWEDM)工艺指标提高以及产生表面黑白交叉条纹的根本原因是工作介质的洗涤性问题,试验证明HSWEDM在使用洗涤性良好的复合工作液后,由于极间冷却状态的改善而使切割工艺指标大幅度提高,切割速度已超过200mm2/min。
6)  LSWEDM machine tool
低速走丝电火花线切割机
补充资料:下走
1.走卒;供奔走役使的人。 2.自称的谦词。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条