1) Si-Y co-deposition coating
Si-Y共渗涂层
2) Si-Y2O3 co-deposition coatings
Si-Y2O3共渗涂层
1.
Si-Y2O3 co-deposition coatings on Nb-silicide-based ultrahigh temperature alloy were prepared by pack cementation processes.
采用扫描电镜(SEM)、能谱(EDS)与X射线衍射(XRD)分析Si-Y2O3共渗涂层氧化前后的物相组成和组织变化。
3) Al-Si-Y coating
Al-Si-Y涂层
1.
A new Al-Si-Y coating prepared by vacuum arc plating was introduced,and its conventional technical properties was analyzed.
介绍了研制的新型Al-Si-Y涂层,分析了Al-Si-Y涂层的常规工艺性能。
2.
Al-Si-Y coating were prepared on nickel-base superalloy by Vacuum Arc Plating.
采用真空电弧镀技术在镍基高温合金基材上制备Al-Si-Y涂层。
4) Al-Si-Y alloy coating
Al-Si-Y涂层
1.
In order to improve the oxidation resistance,using the Al-Si-Y cathode target material,Al-Si-Y alloy coating was deposited on ЖС6У Ni base high-temperature alloy by arc ion plating(AIP).
ЖС6УNi基高温合金是航空发动机涡轮叶片常用的材料,为了提高其氧化性能,利用自制的Al-Si-Y合金阴极靶材,采用电弧离子镀技术在ЖС6УNi基高温合金基体上沉积Al-Si-Y合金涂层,研究了Al-Si-Y涂层在1100℃时的恒温氧化性能、1000℃时的循环氧化性能。
2.
In order to improve both oxidation and corrosion resistances of coating,the Al-Si-Y alloy coating was deposited on Ni based superalloy ЖС6У with taking the home-made Al-Si-Y alloy as cathode target material.
为提高Al-Si-Y涂层的抗高温氧化和耐热腐蚀性能,利用自制的Al-Si-Y合金阴极靶材在ЖС6У镍基高温合金基体上沉积Al-Si-Y合金涂层,研究了Al-Si-Y涂层在1100℃时的恒温氧化性能、1000℃时的循环氧化性能以及涂层在850℃时的75%Na2SO4+25%K2SO4熔盐热腐蚀行为,并将其与传统的二元渗Al-Si层以及国内外的多元涂层相比较。
5) Al-Si coatings
渗Al-Si涂层
1.
High temperature oxidation properties of Al-Si coatings on a DZ4 supperalloy;
DZ4合金渗Al-Si涂层抗高温氧化机理研究
6) Si-modified aluminide coating
Si改性渗涂层
1.
Unlike the Si-modified aluminide coating,this technique is much effective and cheap without the need for long time diffusion for the formation of the Al-Si fusing coating,and the concentrations of the oxidation-resistant elements,Al and Si,in the coating can be controlled by adjusting powder mixing .
与Si改性渗涂层相比,这种工艺相对简单,不需要经过长时间的扩散就能形成足够厚度的Al-Si熔结涂层,省时节能,且涂层中抗氧化元素铝、硅的浓度可通过调整粉末的混合比例来进行控制。
补充资料：渗人
1.使人害怕。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条