1) Co-W alloy coating
Co-W合金镀层
1.
On the base of parameters optimization of the electric brushing coating, Co-W alloy coating with good performance was obtained successfully.
本文研究了电刷镀Co-W合金镀层的制备方法、性能及在模具表面强化方面的应用。
2) Ni-W-Co-CB4 composite coatings
Ni-W-Co-B4C复合镀层
1.
The abrasive wear behaviors of electrodeposited Ni-W-Co-CB4 composite coatings were examined.
利用电沉积技术在45钢表面制备了Ni-W-Co-B4C复合镀层,并研究了油润滑磨损条件下Ni-W-Co-B4C复合镀层的磨损特性。
3) Co-W alloy
Co-W合金
1.
The Co-W alloy coating was prepared by brush plating at different working voltage, and the microstruc-ture of coating was investigated by means of XRD as well as the bonding strength, oxidation resistance and thermal stability .
在不同施镀电压下制备了Co-W合金电刷镀层,利用X射线衍射仪分析了镀层的组织结构,测试了镀层的结合力、抗氧化性、热稳定性等性能。
4) Ni-W alloy coatings
Ni-W合金镀层
1.
The effect of Tungsten on the microstructure of Ni-W alloy coatings prepared by the pulse electrodeposition technology is firstly investigated by X-ray Diffraction.
利用脉冲电沉积的方法制备了Ni-W合金镀层,在微观形貌上与用直流电沉积方法得到的镀层进行比较。
2.
Ni-W alloy coatings are prepared by pulse electrodeposition.
利用脉冲电沉积方法制备了Ni-W合金镀层,观察了该镀层在不同载荷下的摩擦磨损行为,探讨了该合金镀层的摩擦磨损机理,并与45钢进行了对比试验。
3.
Ni-W alloy coatings with excellent hardness, wear resistance and appearance produced by electrodeposition were introduced in this dissertation.
本文用电沉积方法制备了具有良好硬度、耐磨性和外观质量的Ni-W合金镀层。
5) Ni-Fe-W alloy coatings
Ni-Fe-W合金镀层
1.
A new Ni-Fe-W alloy coatings were obtained by pulse electrodeposition,the effect of W in the electrolyte contents on the structure of coatings,and the effect of the electrolyte contents on the hardness and thickness of coatings were discussed.
利用脉冲电沉积的方法制备了Ni-Fe-W合金镀层,讨论了镀液中W的含量对Ni-Fe-W合金镀层组织结构的影响,以及镀液成分对镀层硬度及厚度的影响。
2.
Then,the effects of the concentration of NiSO_4·6H_2O、Na_2WO_4·2H_2O、FeSO_4·7H_2O and temperature on the quality of Ni-Fe-W alloy coatings are also addressed.
并采用正交实验的方法研究了主盐浓度以及温度对脉冲电沉积Ni-Fe-W合金镀层的影响,通过对硬度、沉积速度以及外观的分析,筛选出了最佳的工艺条件。
6) Ni-W-P alloy coating
Ni-W-P合金镀层
1.
Study on the properties of Ni-W-P alloy coating;
Ni-W-P合金镀层性能研究
2.
The test results show that the Ni-W-P alloy coatings adhere to the substrate very well and have no pore when coating thickness reaches 15μm.
93wt％的Ni-W-P合金镀层。
补充资料：A1-Cu-Co合金中十次对称准晶单晶体及其衍射图
A1-Cu-Co合金中十次对称准晶单晶体及其衍射图
‘ Al Cu—Co合金中十次对称准晶堕晶体e1)及其衍射圈(z) 中国科学盹垒禹研览听供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条