1) Spiral Bevel Gear Drive
螺旋锥齿轮传动
1.
Elaborate Analysis of Transmission Strength about Spiral Bevel Gear Drive;
螺旋锥齿轮传动强度精细分析
2) Double circular-arc helical bevel gears for nutation drive
双圆弧螺旋锥齿轮章动传动
3) Spiral bevel and hypoid gears
螺旋锥齿轮
1.
Research on NC machining 3D simulation of spiral bevel and hypoid gears;
螺旋锥齿轮数控加工3维仿真研究
2.
Because the value of Ra is affected by a lot of facts and some of them are undefined,the surface roughness forecasting of spiral bevel and hypoid gears is a typical gray system.
影响螺旋锥齿轮磨削加工表面粗糙度Ra值的因素众多且很多不明确,该Ra值的预测属典型的灰色问题。
3.
Due to the technology secret, there is no information aboutmeasuring the two parameters of spiral bevel and hypoid gears on line tobe vended, and the exceptional complicated teeth profile of the gearsmakes it difficult to measure the two physics parameters on line.
由于国外技术保密，目前尚无有关螺旋锥齿轮磨削力和表面粗糙度在线测量的资料公开发表，螺旋锥齿轮异常复杂的齿廓形状又给这两个物理量的实际在线测量带来困难。
4) Spiral Bevel Gears
螺旋锥齿轮
1.
Research on Simulation System of Duplex Spread Blade Multi-axis Machining for Spiral Bevel Gears;
螺旋锥齿轮双重双面法多轴联动数控加工计算机仿真研究
2.
The normal arc spiral bevel gears is a new type of transmission pair.
法向圆弧螺旋锥齿轮传动是一种新的锥齿轮传动形式。
3.
For deficiency of the Gleason design technique for the spiral bevel gears,in which the meshing function is unable to be predesigned in whole tooth contact,a theory for the meshing characteristic-oriented design of point-contact tooth surface was presented.
针对格里森螺旋锥齿轮齿面设计方法无法在整个齿面接触传动过程中有效控制齿面啮合特性的不足,论述一种按预定的啮合特性设计点啮合齿面的理论和方法:啮合齿面的接触迹线上每一点的几何结构按预定的齿面啮合特性要求设计,而与特定的机床结构参数无关。
5) spiral bevel gear
螺旋锥齿轮
1.
Surface error measurement of spiral bevel gears using scanning measurement;
螺旋锥齿轮齿面扫描式测量法及其应用研究(英文)
2.
Study on and Design of Pneumatic System for NC Spiral Bevel Gear Burnishing Machine;
气动在数控螺旋锥齿轮研齿机中的应用研究
3.
Study on Machining Simulation System of CNC Spiral Bevel Gear Grinding Machine;
数控螺旋锥齿轮磨齿机加工仿真系统的研究
6) Bevel Gear
螺旋锥齿轮
1.
Analysis of interpolation error of NC machining for bevel gear space curved face;
螺旋锥齿轮空间曲面NC加工插补误差分析
2.
After establishing the model of solving the contacting points of two bevel gear tooth surfaces expressed by B SPLINE function, the author changes the model to an boundary limited optimization and uses “BOX” method to solve the problem.
建立了由样条函数表示的螺旋锥齿轮副齿面接触点的求解模型———带区间的五元三次非线性方程组 。
3.
According to NC grinding principle and the tooth mathematical models of bevel gear,the forming principle and influencing factors of generating surface roughness of bevel gear are analyzed by the single blade method which used for the cup-shaped grinding wheel.
根据螺旋锥齿轮的数控磨削原理和齿面数学模型,分析了单面法用直口杯砂轮展成螺旋锥齿轮时表面粗糙度的形成机理与影响因素。
补充资料：螺旋齿轮传动
由两个配对斜齿轮组成的交错轴间的齿轮传动，又称交错轴斜齿轮传动。图中，过两分度圆的切点C作两分度圆柱的公切面,两轮轴线在该平面上投影的夹角称为轴交角Σ。当两轮的螺旋角β1、β2方向相同时,|Σ|＝|β1|＋|β2|；当两轮的螺旋角方向相反时，|Σ|＝|β1|-|β2|。配对的螺旋齿轮传动，其法面模数mn必须相等；如螺旋角β不相等,则它们的端面模数不相等。与平行轴间的圆柱齿轮传动一样，这种传动的传动比等于两轮齿数之反比。由于齿间的滑动速度往往很大，传动效率低，磨损快；两齿面是点接触，接触应力较大,故承载能力差,寿命较短。因此，螺旋齿轮传动仅用于传递运动或很小的动力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条