说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 最优石粉含量
1)  optimal the fine aggregate content
最优石粉含量
2)  limestone powder content
石粉含量
1.
Influence of limestone powder content on the performance of medium and low strength machine-made sand concrete;
石粉含量对中低强度机制砂混凝土性能的影响
3)  optimum water content
最优含水量
1.
The result shows that the wall has a high pore water pressure which is closely related with filling progress,the soil moisture content,and the earth moisture controlled around the optimum water content dur.
根据观测资料对施工期心墙孔隙水压力、应力以及沉降变形观测分析后得到:心墙在施工期产生的高孔隙水压力与填筑进度以及土料含水量大小密切相关,施工期将土料的含水量控制在最优含水量附近对心墙填筑有利。
4)  optimum moisture content
最优含水量
1.
The difference between the impermeable barriers(D) or filled soil water content and optimum moisture content is adopted as the quality controlling index.
影响土石坝的质量关键因素之一在于土石坝防渗体施工的质量,一般设计要求采用压实度D及填筑含水量与最优含水量的差值作为质量控制指标,然而用常规的室内标准击实试验求最大干密度及最优含水量,试验时间至少两天,以此进行现场施工质量控制显然是不现实的。
2.
The maximum dry density and optimum moisture content can be worked out through the function.
通过构造正交函数族并确定其权值,求解得到ρd—ω函数关系式,对其求导可以得到最大干密度和最优含水量。
3.
This paper introduces the methed that determines the optimum moisture content of back-filling soil according to the com-pacting principle of soil.
文章介绍了根据土的压实原理确定回填土最优含水量的方法。
5)  optimal water content
最优含水量
1.
According to the principle of tamping at three points, a programme is developed to calculate the compacted density and the difference between optimal water content and filled soil water content .
根据三点击实法的原理 ,用计算器编程计算压实度 D和最优含水量与填土含水量的差值 ( w0 p-wf) ,较传统作图法省时省事。
6)  high content stone powder
高石粉含量
1.
Laboratory tests were carried out on the large size concrete specimen (three-graded coarse aggregate) to investigate the mechanical property and dry shrinkage characteristics of the concrete containing high content stone powder man-made sand.
通过高石粉含量人工砂的优选、高石粉人工砂混凝土力学性能和干缩性能的试验研究以及与大尺寸原级配混凝土的对比分析,证明了高石粉人工砂用于混凝土工程是可行的,它能提高混凝土力学性能,改善新拌混凝土和易性,提高混凝土抗裂能力。
补充资料:炭黑细粉含量
分子式:
CAS号:

性质:在规定的实验条件下,造粒炭黑通过规定的筛网的部分。以一定量的造粒炭黑放入振筛机的筛网上振筛,通过筛子的炭黑作为造粒炭黑的细粉含量,其结果以质量分数表示。主要用以衡量造粒的效果。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条