1) Through high-strength bolt
穿芯高强螺栓
1.
A series of new type connection details were brought forward: Through high-strength bolts-end plates (THB), Single through interior diaphragm (STI), T-shaped anchorage (A), studs on the non-welded side (S), non-welded on the fourth side of the interior diaphragm (COM).
本文针对方钢管混凝土梁柱内隔板式节点应用中存在的问题，提出了穿芯高强螺栓-端板(THB)、隔板单边贯通柱壁板(STI)、节点域设置锚固T形件(横置或竖置)(A系列)、隔板单边不焊设置圆柱头栓钉(S系列)等节点形式。
2) high strength bolt
高强螺栓
1.
The three-dimension nonlinear finite element analysis on the overhang plate high strength bolt link;
外伸端板高强螺栓连接三维非线性有限元分析
2.
Failure analysis of 10.9 grade high strength bolt
10.9级高强螺栓断裂失效分析
3) high-strength bolt
高强螺栓
1.
Study on the moment-rotation relationship of high-strength boltend-plate connection joints;
高强螺栓端板连接节点的弯矩—转角关系研究
2.
On the difference between the friction type connection and pressure-bearing type connection with high-strength bolts;
关于高强螺栓摩擦型连接和承压型连接区别的探讨
3.
Study on technology of exerting pretension strength on high-strength bolts in steel structures
对高强螺栓施加预拉力方法的研究
4) High-strength bolts
高强螺栓
1.
Through the comparison of the bolts design at all levels which used in flange of tubular steel pole, an idea of adopting high-strength bolts with 8.
在城网线路建设中,钢管杆得到了广泛的应用。
2.
The connection design method considering prying action in “Technical specification for high-strength bolts connection of steel structure JGJ82” of China is introduced.
分析和研究了钢结构高强螺栓受拉连接采用外伸端板或T型接头的破坏机理、杠杆力产生的原因以及杠杆力的计算理论。
3.
The following topics are involved:the various thickness of welded hollow spherical joints, the wrong operation of bolted spherical joints, the initial deflection of grid structures, the grade and material of high-strength bolts, checking computation of th.
本文探讨网架、网壳及轻钢结构的设计、施工、检验中的有关问题,主要内容包括:空心球厚簿不匀;螺栓球节点"马蹄缝"、"假拧";螺栓球网架起拱及挠度控制;高强螺栓的材料、级别、等强;混合节点;施工安装验算;钢材与杆件拼接;焊缝等级、缺陷、可焊性及化学成份;杆件旁弯,试验及加固;荷载与侧移等。
5) high strength bolts
高强螺栓
1.
9 frictional type high strength bolts were used in the joint with flanges and web spliced.
9级高强螺栓摩擦型连接,翼缘和腹板全部拼接。
2.
BY analyzing the fatigue failure modes of susponder,the fatiguefracture of the high strength bolts is a main failure mode of the suspender spocimen.
对吊点试件的破坏形式进行了分析，得出高强螺栓疲劳断裂是吊点试件的主要破坏。
6) high strength bolts
高强度螺栓
1.
Manufacturing Practice of high strength bolts for slab caster;
板坯连铸机高强度螺栓制造工艺
2.
Study on reliabilities of high strength bolts and their bolted joints;
高强度螺栓及其接头可靠度的研究
3.
In this article, it is briefly being introduced that an experimental investigation of a new-style torsion type high strength bolts with large hexagon and connectors being used in 450 meters long stiffed steel truss of Fengdu Yangtse River Great Bridge, the result present that an dates meet natio oode s requirement.
介绍了用于丰都长江大桥450加劲钢桁梁的新型大六角扭剪型高强度螺栓及接头的试验研究，结果表明各项数据均满足国标要求。
补充资料：胶管穿铁芯机
分子式：
CAS号：
性质：用于有芯法成型胶管时，将铁芯先穿入胶管管坯中，以便成型。主要由穿铁芯机及其辅助用机架、工作台等组成。机架用于放置铁芯，工作台用于放置管坯。穿铁芯机有上、下工作辊，辊面有五种适应不同管径穿过的沟槽，以供选用。下工作辊固定不能移动，上工作辊由气缸带动可以升降，上下工作辊由电机驱动相向回转。操作时，先将铁芯的一端通过穿铁芯机的工作辊，伸至工作台的边缘。由人工将铁芯穿入管坯少许，并用手握住。在管坯的另一端注入压缩空气，使管坯膨胀，以便于穿铁芯，启动穿铁芯机，即可将铁芯送入管坯之中。
CAS号：
性质：用于有芯法成型胶管时，将铁芯先穿入胶管管坯中，以便成型。主要由穿铁芯机及其辅助用机架、工作台等组成。机架用于放置铁芯，工作台用于放置管坯。穿铁芯机有上、下工作辊，辊面有五种适应不同管径穿过的沟槽，以供选用。下工作辊固定不能移动，上工作辊由气缸带动可以升降，上下工作辊由电机驱动相向回转。操作时，先将铁芯的一端通过穿铁芯机的工作辊，伸至工作台的边缘。由人工将铁芯穿入管坯少许，并用手握住。在管坯的另一端注入压缩空气，使管坯膨胀，以便于穿铁芯，启动穿铁芯机，即可将铁芯送入管坯之中。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条