说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 塑性削减应力当量荷载
1)  equivalent load of cut-down plastic stress
塑性削减应力当量荷载
2)  Equivalent Load
当量载荷
1.
Analysis on the stresses of self-lubrication plain radial bearing and determination on its equivalent load;
向心自润滑关节轴承受力分析及当量载荷的确定
2.
This paper presents a conversion method of an equivalent load which can meet the needs .
提出了一种满足疲劳寿命等效要求的当量载荷处理方法 ,并得到试验验证。
3)  equivalent plastic strain energy
当量塑性应变能
1.
25Cr1Mo steel, the high temperature low cycle fatigue life was evaluated by the criterions of equivalent strain range, equivalent plastic strain energy and equivalent gross energy.
2 5Cr1Mo钢材料圆柱形试件的高温低周疲劳行为的研究 ,用当量应变范围准则、当量塑性应变能准则和当量总应变能准则评价多维应力状态下的高温低周疲劳寿命。
4)  plastic load
塑性载荷
1.
By considering the contact between the teeth and utilizing the face to face contact model with contact element and coulomb friction model,a computing method for plastic load of tooth-locked quick actuating pressure vessel based on finite element stress analysis and the 5% maximum principal strain rule have been developed.
通过接触单元数值模拟啮合齿的接触过程,采用5%最大主应变准则,建立了基于整体有限元分析的齿啮式快开压力容器塑性载荷计算方法。
2.
By considering the contact between the teeth and utilizing the face to face contact model with contact element and coulomb friction model,the author have developed a computing method for plastic load of tooth-locked quick actuating pressure vessel based on finite element stress analysis and stress categorization.
通过接触单元来数值模拟啮合齿的接触过程,建立了基于整体有限元分析的齿啮式快开压力容器塑性载荷计算方法。
3.
The proposed criterion is used to evaluate plastic loads in pressure vessel design by analysis using elastic-plastic finite element analysis to guard gross plastic deformation of pressure vessel.
提出了按5%应变确定塑性载荷的最大主应变准则。
5)  load stress
荷载应力
1.
Analysis of influence by differential settlement of foundation to cement concrete pavement load stress;
不均匀沉降对水泥混凝土路面荷载应力的影响
2.
The law that the load stress at the loading position critical to fatigue loss varies with the structural parameters of CRCP is studied at different intervals of the cracks, with relevant proposals for confirming those parameters.
研究了不同CRCP裂缝间距下,CRCP疲劳损耗临界荷位处的荷载应力随路面结构参数变化的规律,对路面结构参数的确定提出了相应的建议。
6)  loading stress
荷载应力
1.
Effects of existing asphalt pavement on loading stress of ultra-thin-whitetopping pavement;
旧沥青路面对超薄水泥混凝土路面荷载应力影响
2.
Exact solution of loading stress in continuously reinforced concrete pavement;
连续配筋混凝土路面荷载应力精确解
3.
Analysis of the Loading Stress of RCC-AC Composite Pavement;
碾压混凝土与沥青混凝土复合式路面结构荷载应力分析
补充资料:轧辊残余应力(见轧辊应力)


轧辊残余应力(见轧辊应力)
residual stresses in roll

zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条