1)  combustion efficiency
补燃效率
1.
It is one of the key techniques for SDR to enhance mixing and increase combustion efficiency of fuel-rich gas and air in combustor.
补燃室内空气同燃气的掺混、燃烧过程较为复杂,影响补燃效率的因素很多。
2)  supplemental combustion
补燃
1.
Performance analysis for irreversible combined heat engine cycle with supplemental combustion;
补燃型不可逆联合循环热机的性能分析
2.
Base on the combined power cycle model provided by literature,this paper established a model of combined carnot and rankin cycle model with heat resistance,heat leakage and supplemental combustion.
在原有的联合循环模型的基础上,建立了一个存在热阻、热漏和补燃的卡诺和朗肯联合循环热机模型。
3)  supplementary firing
补燃
1.
A model on calculation of thermal efficiency during flue gas condensation of natural gas is built, the relationship of gas thermal efficiency with flue gas temperature, air factor, and air humidity ratio is discussed, and influence of air preheating and supplementary firing on gas thermal efficiency is analyzed.
建立了天然气烟气带冷凝过程热效率计算的数学模型,讨论了排烟温度、空气系数和空气含湿量与热效率的关系,分析了空气预热和补燃对热效率的影响。
2.
Two kinds of supplementary firing equipments used for HRSG (Heat Recovery Steam Generator) are introduced, and it gives a detailed description of the structureal design and performance features of supplementary fired HRSG.
介绍了燃-蒸联合循环余热锅炉补燃装置的分类及布置形式,重点介绍了带内补燃装置的余热锅炉的设计特点,对余热锅炉设计及选型具有参考作用。
4)  afterburning chamber
补燃室
1.
Effects of fuel-gas jetting modes on mixing effectiveness in the afterburning chamber of solid rocket ramjets;
燃气喷射方式对冲压发动机补燃室掺混效果的影响
2.
Numerical simulation of mixing and combustion in afterburning chamber for ringed-propellant solid rocket ramjet engine was done by standard κ-ε two equation turbulent models.
文中采用标准κ-ε双方程湍流模型数值模拟一种环向进气的固体火箭冲压发动机补燃室的掺混燃烧过程,考虑了补燃室的出口反压、空燃比和燃气喷射角度等设计参数对燃烧流场的影响,结果表明:增大出口反压和空燃比,有利于补燃室内掺混和燃烧的进行;增大燃气喷射角度,补燃室头部温度升高,燃料停留时间增大,对燃烧流场特性影响不大。
5)  supplemental firing system
补燃系统
1.
A detailed description of unique subsystem in the HRSG,for instance,VHP & LP section circulating system,supplemental firing system and SCR.
系统介绍了新型余热锅炉的几个特点:双压力等级的汽水系统,管式燃烧器的补燃系统和选择性催化还原脱硝装置,并针对新特点的调试方法和调试过程进行了充分说明,最后对进一步研究和调试运行类似的余热锅炉提出建议。
6)  staged combustion cycle engine
补燃循环
1.
Turbine power control of staged combustion cycle engine during start-up;
补燃循环发动机起动过程涡轮功率控制
参考词条
补充资料：配置效率和生产效率
　　在经济学上，经济发展的动力，或者说效率的来源，分为两类：一类是配置效率，二是生产效率。所谓配置效率，是指给定资源和技术的条件下，怎么样使资源从边际生产率低的地方流向边际生产率高的地方，从而使得资源和利用更合理、社会总价值达到最大;而生产效率是指如何通过技术进步提高每一种资源的生产率，也就是把社会的生产可行性边界向外移。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。