说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 截交线和相贯线
1)  section and intersection lines
截交线和相贯线
1.
The system selects a difficult teaching point of "section and intersection lines" as example to implement the experience-teaching.
在此理念指导下,作者以营造"体验"环境,建构由低级向高级过渡渐次递进的"体验"历程为手段,应用最新的JAVA 3D技术设计了工程制图模型的参数化虚拟实验系统,并针对工程制图中的教学难点,即截交线和相贯线进行了相关的"体验教学"设计。
2)  line of pro-cuts
正交相贯线
3)  intersection [英][,ɪntə'sekʃn]  [美]['ɪntɚ'sɛkʃən]
交贯线
1.
This paper deals with the method for the parameter drawing of the projection of the intersection that one cylinder crosses another and detailed descriptions are give
讨论了如何利用VLISP编程解决圆柱相交之交贯线投影的参数化绘图问
2.
This paper deals with the method of the parameter drawing of the projection of the intersection that one cylinder crosses another cone based on AutoCAD 2000 and detailed descriptions are give
本文讨论了在AutoCAD 2 0 0 0平台上如何利用VLISP编程解决圆柱面与圆锥面相交之交贯线投影的参数化绘图问题 ,详细阐述了编程过程并给出了部分源程序代
4)  intersecting line
相贯线
1.
Mathematic model of pipe intersecting line NC cutting and its automatic programming system development;
管件相贯线数控切割数学模型及其自动编程系统的研发
2.
Study on computer script system of intersecting lines on polygonal steel pipes;
多边形钢管相贯线的计算机放样研究
3.
A way of calculating the intersecting line of cylinder and cone with the aid of supplementary plane;
借助特定辅助平面求圆柱圆锥相贯线的方法
5)  intersecting curve
相贯线
1.
Design of Cutting Machine for Intersecting Curve of Major Diameter Steel Pipes;
大直径钢管相贯线数控切割机的设计
2.
In order to solve the problem of processing the three-dimensional curved surface in intersecting curve with groove cutting at the end of pipe, the ensurance of torch track and the selection of torch pose become the key to better processing quality.
针对管端相贯线坡口切割过程中存在三维空间曲面加工问题,研究割炬轨迹的保证和姿态的选择是获得良好加工质量的关键。
3.
They include not only the intersecting curve models of pipe-pipe, pipe-plate, Miter joint and multiple laps, but also the cutting models of groove angle in the light of SY/T4802-92 and AWS standards.
在实现数控切管机国产化的工作中,研究并建立相贯线的数学模型是至关重要的,这不仅包括常用的管-管、管-板的相贯,构成Miter接头的相贯线,包括多个管、板相贯线的数学模型,而且包括完成与两面角有关的坡口角切割的数学模型,其依据为SY/T4802-92(等同采用APIRP2A1989)标准和AWS标准。
6)  intersection line
相贯线
1.
Diagraming the characteristic points on the intersection lines between a sphere and a cone by means of the method of anxiliary sphere;
用辅助球面法求圆球和圆锥相贯线上特殊点
2.
VRML and JAVA programs for use in the display ofintersection lines;
应用于相贯线描述的VRML与JAVA程序
3.
The paper will analyses the characteristics and inadequacy of the traditional solution and on this basis, the paper will put forward a new solution of intersection line so as to avoid the inadequacy of traditional solution.
在化工设备制造中 ,首先要准确地放样下料 ,而放样下料的关键是精确地求出相贯线和素线的实长。
补充资料:相贯线
      两空间形体表面的交线(见图),是画法几何研究的一项内容。相贯线的形状取决于两立体的形状、大小和相对位置。如两空间形体的表面都是曲面,相贯线是一条空间曲线;两空间形体的表面都是平面时,相贯线是一条空间折线;两空间形体的表面分别是平面和曲面时,相贯线是由几段平面曲线围成的线。在给定两空间形体后,在多面正投影图中可以容易地画出两立体的投影,但它们的相贯线的投影并不能直接画出,通常采用辅助面法或其他方法先求出相贯线上若干点的投影,然后将它们连接成相贯线。辅助面法是先作出一适当的面,再作出该面和两空间形体的交线,最后作出两交线的交点。所得交点就是相贯线上的点。按此方法改变辅助面的位置,重复作图,就能得到足够的点,将它们连结成相贯线。图中为圆柱和圆锥台相交,为作出其相贯线上的点,选用水平面为辅助面,水平面与圆柱、圆锥台的交线分别是开口矩形和圆。它们的两个交点是相贯线上的点。运用辅助面法的关键在于选取合适的辅助面,辅助面和两空间形体表面的交线投影应是直线或者是圆。作图中常选用平面或球面为辅助面。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条