说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 树脂基复合摩擦材料
1)  resin-based composite friction materials
树脂基复合摩擦材料
2)  resin-based friction materials
树脂基摩擦材料
1.
Prediction model for friction coefficient of resin-based friction materials based on neural network;
基于神经网络的树脂基摩擦材料摩擦因数的预测模型
3)  resin-matrix antifriction composites
树脂基减摩复合材料
1.
Solid-lubricants and their applications in resin-matrix antifriction composites were summarized in the paper, and the lubricating mechanism of the solid-lubricant and antifriction composites were also analysed.
本文对固体润滑剂及其在树脂基减摩复合材料中的应用进行综述,并对各种润滑剂及其在树脂基减摩复合材料中的润滑机理进行分析,最后提出固体润滑剂及减摩复合材料的未来发展方向。
4)  Resin matrix composite
树脂基复合材料
1.
The article described mechanism of physical and chemical modification technology of resin matrix composite and its progress.
概述了树脂基复合材料物理及化学改性技术的作用机理,以及近年来改性技术的最新进展情况,对几种典型改性树脂基复合材料做了简要的介绍。
2.
The theory and application of the resin matrix composite in infrared stealthy technique,radar stealthy technique,and multiple spectrum stealthy technique are presented.
阐述了树脂基复合材料在红外隐身,雷达隐身、多谱隐身技术中的隐身原理及应用情况,分析了树脂基复合材料在隐身技术中的地位和广阔应用前景。
3.
The basic conception of the photopolymerization reaction, the constitution of the photopolymerization resin matrix and the kinds of the reinforced materials in the photopolymerization resin matrix composites were introduced.
介绍光固化反应的基本概念、光固化树脂基体的组成及光固化树脂基复合材料用增强材料的种类。
5)  resin based composite
树脂基复合材料
1.
The requirements for the interfacial combining of the resin based composite under forced condition have been analyzed.
分析了树脂基复合材料受力状况下对界面结合的要求 ,着重介绍了微量冲击和临界纤维断裂长度分析两种检测树脂基复合材料界面剪切强度的方法及其研究成果。
2.
Several resin based composites were prepared by filling of graphite, carbon black and coke in phenolic resin, NBR modified phenolic resin and polytetrafluroethylene (PTFE) as the bonding agents.
采用酚醛树脂、丁腈橡胶改性酚醛树脂和聚四氟乙烯 (PTFE)作为粘结相 ,通过填充一定配比的石墨、焦炭及碳黑制备了 3种树脂基复合材料电刷试样 ,并在 MM- 2 0 0型摩擦磨损试验机上对比考察了复合材料试样与铜对摩时的摩擦磨损性能 。
3.
The types of resin based absorbing composites were presented,such as carbon/thermoplastic resin based composite,fiber reinforced resin composites,resin based nanocomposite.
本文介绍了目前应用在吸波中的几种新型的树脂基吸波复合材料,如碳/热塑性树脂基复合材料、纤维增强树脂基复合材料、树脂基纳米复合材料。
6)  polymer composites
树脂基复合材料
1.
Strength and modulus anisotropy of short fiber reinforced polymer composites;
短纤维增强树脂基复合材料强度和模量的各向异性
2.
As a result of the influence of moisture environments or other severe environments,the mechanical properties of polymer composites will deteriorate with time and make the actual reliability of them lower than that of the pre-designed reliability.
在潮湿环境及其他严酷环境作用下,树脂基复合材料结构的力学性能会逐步降低,使得材料的实际可靠度比预设计的可靠度低。
3.
The influence of low temperature plasma treatments on the chemical and mechanicalproperties of carbon fiber as well as carhon-fiber-reinforced polymer composites are described.
综述了低温等离子体处理对碳纤维(CF)及其增强树脂基复合材料(CFRP)的化学和机械性能的影响,同时也探讨了等离子体技术在纤维复合材料应用中存在的问题和研究方向。
补充资料:玻璃纤维增强树脂基复合材料
分子式:
CAS号:

性质:俗称玻璃钢(glass steel)。以玻璃纤维及其制品增强的树脂基复合材料。这种复合材料具有性能的可设计性,轻质高强;耐腐蚀性能好,可耐除氢氟酸和浓碱外的大多数化学试剂;绝缘性好,透波率高;绝热性好,超高温下可大量吸热;成本低。缺点是模量低,长期耐温性差。广泛应用于机械制造、石油化工、交通运输、航空航天及建筑等工业领域中。如制造车身、船体等大型结构件。飞行器结构件、雷达罩、印刷电路板及耐腐蚀贮罐、管道等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条