1) Complicated technics with multiple processes and factors
多工序、多因素复杂工艺
2) complicated system with multi-factors
多因素复杂系统
1.
It is found that the proposed method can be reasonably to determine the optimum project site in complicated system with multi-factors.
通过最佳因素权重方法,能客观地、定量地确定出多因素复杂系统中的最优场址。
3) Technological factor
工艺因素
1.
The influence of different technological factors of gel casting(PH,deflocculant,solid content,forming temperature,initiator and catalyst) on viscosity and gelling time of Al2O3-SiC ceramic suspension is studied in this paper.
研究了凝胶注模成型的各种工艺因素对Al2O3-SiC复相陶瓷悬浮体的黏度和固化时间的影响。
2.
The result shows that grain size of cBN and raw material purifying treatment in vacuum are the main technological factors of PCBN wear resistance .
通过大量的实验,对立方氮化硼复合片的工艺因素进行了分析。
3.
After studying effects of technological factors (vacuum degree, pattern density, pouring temperature, metallic static head, pattern thickness and coating permeability) on the mold-filling velocity of AZ91D Mg alloy in the EPC process, the influencing law of these technological factors on the mold filling velocity are obtained, and the influencing degree of these tech.
研究结果表明:在研究的工艺因素中,以真空度对充型速度的影响最为显著,其次是模样密度和浇铸温度,直浇道高度的影响相对较小。
4) technical factor
工艺因素
1.
Relationship between technical factors and physical performances of magnesiabased castable;
工艺因素对镁质耐火浇注料物理性能的影响
2.
Therefore, the part machining models have specific requirements and feature which are different from the part design models, and many technical factors concerned with machining need to be considered.
自动编程中零件加工造型的目的,是为了给刀具轨迹提供几何依据;因此零件加工造型具有不同于零件设计造型的特点和要求,必须考虑有关工艺因素的影响。
5) technological factors
工艺因素
1.
Effect of technological factors upon microwave properties of the Ba 6-3 x (Sm 1- y Nd y ) 8+2 x Ti 18 O 54 ceramic;
工艺因素对Ba_(6-3x)(Sm_(1-y)Nd_y)_(8+2x)Ti_(18)O_(54)陶瓷微波特性的影响
2.
Main technological factors which affect YAG laser- MIG/MAG arc hybrid welding were generalized.
对激光与MIG/MAG复合热源焊接的优点以及目前的应用情况作了介绍,着重概括总结了影响激光与MIG/MAG复合焊接的主要工艺因素。
3.
The γ-dendrite morphology and the effects of technological factors in gray cast iron are studied.
试验研究了灰铸铁中γ枝晶的生长形貌及工艺因素的影响作用。
6) process factor
工艺因素
1.
Analysis of process factors of AC FZ-TIG welding for aluminum alloy
铝合金交流FZ-TIG焊工艺因素分析
2.
The effect of various process factors on decarburization process in VD was studied by the model and the optimizing decarburization process in VD can be obtained.
用该模型模拟研究了各工艺因素对VD精炼脱碳过程的影响。
3.
The practice of large scale production showed that a slight fluctuation of process factors would cause quite obvious influence on the material quality of Shenlong car camshafts.
大批量生产实践表明:工艺因素的细微波动会对神龙凸轮轴的材质产生大的影响,工艺因素的控制要保证“五个稳定”,即炉料配比稳定,过热温度和时间稳定,化学成分稳定,孕育剂的入量和白口深度稳定,浇注温度和时间稳定。
补充资料：多苯基多亚甲基多异氰酸酯
多苯基多亚甲基多异氰酸酯，简称PAPI，或称粗MDI，浅黄色至褐色粘稠液体．有刺激性气味。相对密度(20℃／20 ℃)1．2，燃点218℃。PAPI实际上是由50％MDI与50％官能度大于2以上的多异氰酸酯组成的混合物。升温时能发生自聚作用。溶于氯苯、邻二氯苯、甲苯等。PAPI的活性低，蒸气压低，只是TDI的百分之一，故毒性很低。
用于制造聚氨脂胶粘剂。也可直接加入橡胶胶粘剂中，改善橡胶与尼龙或聚酯线的粘接性能。贮存于阴凉、通风、干燥的库房内，远离火种、热源。严格防水、防潮，避免光照。
用于制造聚氨脂胶粘剂。也可直接加入橡胶胶粘剂中，改善橡胶与尼龙或聚酯线的粘接性能。贮存于阴凉、通风、干燥的库房内，远离火种、热源。严格防水、防潮，避免光照。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条