1) Evaporating Thin Film
蒸发薄液膜
1.
Flow and heat transfer characteristics near the solid-liquid interface of an evaporating thin film in a microchannel was investigated using an augmented Young-Laplace model and the kinetic theory.
基于扩展Young-Laplace方程和动力学理论研究微通道中蒸发薄液膜区固液界面附近流动和传热特性,考虑压力特征、壁面滑移和温度跳跃建立物理模型。
2) thin film evaporation
薄液膜蒸发
1.
Analytical prediction of radial dryout point for thin film evaporation in heat pipes with micro-groove evaporator;
热管微槽蒸发器薄液膜蒸发的径向干点预测分析
3) Thin-Film Evaporation
薄膜蒸发
1.
Separation technology of thin-film evaporation of tolylene diisocyanate monomer;
甲苯二异氰酸酯单体的薄膜蒸发分离工艺
2.
With the action of blades' wiping,thin-film evaporation method is characterized by short residence time,low evaporation temper- ature and ability to deal with high viscous pre-polymer,and suitable for monomer's separation.
因刮板刮动物料作用,薄膜蒸发法具有停留时间短、蒸发温度低及能处理高黏性预聚物物料等特点,是较好的单体分离方法。
3.
The free toluene diisocyanate(TDI) in the curing agent TDI-TMP(Trimethylol Propane) of polyurethane was separated in laboratory by means of high-vacuum two-stage thin-film evaporation.
在采用高真空两级薄膜蒸发分离甲苯二异氰酸酯(TDI)-三羟甲基丙烷(TMP)聚氨酯固化剂中游离TDI的实验研究基础上,进行了中试研究。
4) thin-film Evaporator
薄膜蒸发
1.
In order to distil free TDI from the PU curing agent with thin-film Evaporator,a suitable curing agent should be a small molecular weight and reacted thoroughly.
提出了要想在薄膜蒸发器中分离出TDI,得到合格的聚氨酯固化剂产品,需要从合成固化剂入手,相对分子质量小、反应完全的聚氨酯固化剂更适合在薄膜蒸发器中进行分离,研究探讨了聚氨酯合成工艺。
2.
VE liposome was prepared by thin-film evaporator and high pressure homogenization method.
采用薄膜蒸发-高压均质法制备维生素E(VE)脂质体,研究了VE脂质体配方中不同成分的比例及水合介质对脂质体包封率的影响。
3.
Firstly, the working principle of the thin-film evaporator and the related auxiliary equipment were introduced.
本课题将薄膜蒸发工艺引入食用菌多糖的生产,重点研究薄膜蒸发成套的控制系统,这对于提高食用菌多糖生产的自动化水平有着重大的意义。
6) thin evaporated film
蒸发薄膜
补充资料：液膜蒸发器
分子式：
CAS号：
性质：又称液膜蒸发器，主要由竖式列管蒸发器构成。料液预热至沸点左右，自管顶或底部进入，蒸气带动料液自上而下(降膜式蒸发器falling film evaporator)或自下而上(升膜式蒸发器climbing film evaporator)或上下同时(升降膜式蒸发器climbing-falling film evaporator)成膜流动。液面达管长1/4～1/5。料液只通过加热管一次而不作循环。特点是成本低，料液停留时间短(仅数秒)、效率高；但器身长，不利于清洗和更换。适用于蒸发热敏性大和易起泡的溶液。
CAS号：
性质：又称液膜蒸发器，主要由竖式列管蒸发器构成。料液预热至沸点左右，自管顶或底部进入，蒸气带动料液自上而下(降膜式蒸发器falling film evaporator)或自下而上(升膜式蒸发器climbing film evaporator)或上下同时(升降膜式蒸发器climbing-falling film evaporator)成膜流动。液面达管长1/4～1/5。料液只通过加热管一次而不作循环。特点是成本低，料液停留时间短(仅数秒)、效率高；但器身长，不利于清洗和更换。适用于蒸发热敏性大和易起泡的溶液。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条