说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 散状物料输送
1)  Bulk Solids Handling
散状物料输送
2)  granular materials transportation
散料输送
3)  pneumatic capsule pipeline system
散状物料运输
4)  material transportation
物料输送
1.
And the questions, that may exist in each tache,which must be paid attention to, are introduced in this paper, including material transportation system, batching plant system, raw material grinding and waste gas disposal system, raw material homogenizing and feeding into rotary kiln system, firing end.
介绍了物料输送系统、配料站料仓、原料粉磨及废气处理、生料均化和入窑系统、烧成窑头和熟料储存输送以及煤粉制备和输送各个环节的必须关注的细节问题,如在物流输送系统中,下料溜子形状要尽量设计成“垂直”或“倒喇叭”形;石灰石输送线上的下料溜子内衬应尽量选择高耐磨性内衬等。
2.
According to the manufacturer s technology and experiences for solid material transportation devices,it is pointed out that the safety protection methods and how to realize in the material transportation devices.
针对在主要以固体物料作为介质的装置中采用的物料输送设备的电机控制方案,顺序控制方案以及在设计时应注意的问题进行了详细的阐述。
5)  bulk solids
散状物料
1.
In the paper,the advances in flow property of bulk solids and silo design were summarized.
介绍了散状物料流动特性和仓体设计方面的研究成果,包括理论研究的连续介质模型、颗粒动理论模型和离散元模型,介绍了它们的基本原理;此外,还介绍了实验研究的Johanson In-dicizer System以及仓体设计方面的理论与实验研究;最后提出了有待解决的问题。
2.
In view of the dynamic problem of bulk solids at discharge,a kind of method for calculating wall pressure due to materials in the silo is introduced,vertical and horizontal pressure are measured using micro earth pressure cells in laboratory,lateral pressure coefficient of testing and calculating are compared.
针对散状物料卸载过程的动力学问题,介绍了料仓内物料对仓壁压力的理论计算方法,并应用微型土压力传感器对垂直和水平压力进行了实验室实验,将实测的侧压力系数与理论计算值做比较,提出了修正侧压力系数的方法。
6)  material conveyer belt
物料输送带
补充资料:散状物料
      堆积在一起的大量未经包装的块状、粒状、粉状物料(简称散料),例如煤、砂、谷物、水泥和糖块等。散料大多用输送机运送。散料与物料搬运机械选型有关的主要特性有以下几方面。①粒度(a):散料颗粒(或料块)的最大线长度。由于散料的颗粒很多且各颗粒大小不等,只能以典型颗粒的粒度作为一批散料的粒度。对于经过(或未经过)筛分的散料,典型颗粒粒度的计算方法有专门的规定。②堆积密度(0):散料在自由堆积状态下单位体积内的质量。③堆积角 (嗞):自由堆积成的散料堆表面与水平面的夹角。在静止平面上形成的堆积角叫静堆积角 (嗞′); 在运动平面上形成的堆积角叫动堆积角(嗞″)。对于流动性好的散料,可认为:μ=tg嗞′,μ为散料的内摩擦系数。④外摩擦系数(μ W):散料与其承载件接触表面间的摩擦系数。根据散料与承载表面间相对状态的不同,有静摩擦系数和动摩擦系数之分。此外,物料搬运机械的选择还与散料的磨琢性、流动性、粘性、腐蚀性、吸湿性和湿度等有关。例如螺旋输送机的螺旋直径与散料的粒度有关;带式输送机的输送能力与散料的堆积密度、堆积角有关;料仓(见料仓装置)的几何形状与散料的外摩擦系数有关。
  
  参考书目
   洪致育、林良明主编:《连续运输机》,机械工业出版社,北京,1982。

  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条