说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 泥浆泵研制
1)  the developing of mud pump
泥浆泵研制
2)  slurry pump
泥浆泵
1.
Experimental study of effect of particle size on characteristics of a slurry pump;
泥砂粒径对泥浆泵性能影响的实验研究
2.
Development of automatic controller of slurry pumps NJB-1;
NJB-1型泥浆泵自动控制器的研制
3.
The pressure oscillation of discharge pipe of the triplex slurry pump is caused by the flux oscillation,usually installing air-volume around inhaling or discharge pipe to reduce the pressure oscillation.
三缸单作用泥浆泵排出管内的压力脉动是由流量脉动引起的,为减少压力脉动,通常在吸入或排出管路上安装空气包。
3)  mud pump
泥浆泵
1.
Study on the ability of mud pump for Liuhua mega-extended-reach wells in South China Sea.;
流花油田超大位移井泥浆泵设备能力分析研究
2.
Development of mud pump for development drilling;
石油钻井用泥浆泵的新发展
3.
Heat craftsmanship of mud pump large-sized crankshaft 40 MnB;
泥浆泵40MnB大曲轴铸件的热工艺改进
4)  hydraulic dredge pump
泥浆泵
1.
The technique of reclaiming disturbed lands by use of a hydraulic dredge pump,called“digging deep to fill shallow”,has been used in the treatment of subsidence areas incoal mines.
用泥浆泵挖深垫浅的复田方法已在我国煤矿沉陷区治理中得到应用,但迄今为止尚未对这一技术进行深入研究。
2.
@P1Soils, reclaimed by hydraulic dredge pump in different periods and layers of land in Xuzhou mining area were monitor ed and analysed.
以徐州矿区为例,对不同时期不同层次泥浆泵复垦土壤进行了监测和分析,揭示了泥浆泵复垦土壤化学特性的时空演化规律。
5)  7NB mud pump
7NB泥浆泵
1.
In this paper, the 7NB mud pump, a new mud pump, was described.
介绍了一种钻井用新型泥浆泵— 7NB泥浆泵 ,在分析新型泥浆泵的结构特点和工作机理的基础上 ,通过简化结构 ,建立了 7NB泥浆泵的运动方程和解析计算模型 ,并实现了该新型泥浆泵主要运动部件的运动学分析计算。
6)  sludge pump
泥浆泵
1.
Application of the Ceramic Cylinder Sleeves of the Sludge Pumps for Discharging Red Mud;
赤泥外排泥浆泵陶瓷缸套的应用
2.
This paper probes into the feasibility of concrete pump and sludge pump applied in the construction of works on coastal shoal from several aspects such as the performances of concrete pump and sludge pump, and pump sending course, etc.
从混凝土泵和泥浆泵的性能和泵送过程等几个方面探讨了混凝土泵和泥浆泵在沿海滩涂土方工程施工中可行性的应用。
补充资料:泥浆泵
      钻探过程中,向钻孔里输送泥浆或水等冲洗液的机械(见图)。泥浆泵是钻探设备的重要组成部分。在常用的正循环钻探中,它是将地表冲洗介质──清水、泥浆或聚合物冲洗液在一定的压力下,经过高压软管、水龙头及钻杆柱中心孔直送钻头的底端,以达到冷却钻头、将切削下来的岩屑清除并输送到地表的目的。常用的泥浆泵是活塞式或柱塞式的,由动力机带动泵的曲轴回转,曲轴通过十字头再带动活塞或柱塞在泵缸中做往复运动。在吸入和排出阀的交替作用下,实现压送与循环冲洗液的目的。
  
  
  泥浆泵分单作用及双作用两种型式,单作用式在活塞往复运动的一个循环中仅完成一次吸排水动作。而双作用式每往复一次完成两次吸排水动作。若按泵的缸数分类,有单缸、双缸及三缸3种型式。
  
  泥浆泵性能的两个主要参数为排量和压力。排量以每分钟排出若干升计算,它与钻孔直径及所要求的冲洗液自孔底上返速度有关,即孔径越大,所需排量越大。要求冲洗液的上返速度能够把钻头切削下来的岩屑、岩粉及时冲离孔底,并可靠地携带到地表。地质岩心钻探时,一般上返速度在0.4~1.0米/分左右。泵的压力大小取决于钻孔的深浅,冲洗液所经过的通道的阻力以及所输送冲洗液的性质等。钻孔越深,管路阻力越大,需要的压力越高。随着钻孔直径、深度的变化,要求泵的排量也能随时加以调节。在泵的机构中设有变速箱或以液压马达调节其速度,以达到改变排量的目的。为了准确掌握泵的压力和排量的变化,泥浆泵上要安装流量计和压力表,随时使钻探人员了解泵的运转情况,同时通过压力变化判别孔内状况是否正常以预防发生孔内事故。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条