1) PanGang sintering flue
攀钢烧结烟气
2) sintering waste gas
烧结烟气
1.
As a result, the dense flow absorber process was selected to treat the sintering waste gas.
根据石家庄钢铁股份有限责任公司烧结机机头烟尘特点,对几种不同的处理方法进行比较,提出了采用密相干塔烟气脱硫的方案,来进行烧结烟气脱硫。
2.
In the near future the technologies for simultaneous desulfurzation and denitrition technologies of sintering waste gas will become a big hot point in the fields of waste gas desulfurization and denitrification at home and abroad.
鉴于烧结烟气的脱硫脱硝技术是目前国内外脱硫脱硝研究的一大热点,介绍了典型的可用于烧结烟气脱硫脱硝技术以及目前国内外新兴的烟气同时脱硫脱硝技术,并对各种技术的优缺点进行了分析。
3.
3 sintering plant were introduced in detail,which can be used as reference for sintering waste gas desulphurization.
本文详细介绍了NID脱硫工艺的原理、主要设备、工艺流程、技术特点及在三烧的应用情况,以期为烧结烟气脱硫提供参考。
3) sintering gas
烧结烟气
1.
By choosing CFBA system as test platform,particles which were suitable for desulfurization reaction of fluidized sintering gas were selected through changing the process of spray humidification,while existing alkaline raw materials and alkaline wastes were made full use of in steel enterprises.
以CFBA工艺为测试平台,充分利用钢铁企业现有的碱性原料和碱性废物,通过喷雾增湿过程,展开适于烧结烟气流态化脱硫反应的粒子选择研究,研究结果表明:99。
2.
For desulphurization of sintering gas,a pilot dense flow absorber was built and desulphurization experiment was carried out.
为进行烧结烟气的脱硫处理,建立了密相干塔烟气脱硫新技术的试验装置,并进行了脱硫试验研究。
3.
It is a highly efficient sintering gas desulphurization technology which features in stable operation and small investment.
通过对国内外烧结烟气进行分析,对动力波脱硫技术不断改进和完善,开发出了动力波烧结尾气脱硫技术。
4) ore sintering flue gas
烧结烟气
1.
The research of desulfurization reagent optimum burden made by lime and pulverized coal ash on the ore sintering flue gas;
活性石灰/粉煤灰制备烧结烟气脱硫剂配比试验研究
2.
A research was carried out on the desulfurization reagent made by lime that is common used in steel corporation and sinter ash produced by steel corporation's procreant scrap, and a trial about the capability of the desulfurization reagent on the Ore sintering flue gas was done in the Angang's Circulating fluidized bed absorber tester which can dispose flue gas of 5000 m3/h.
本文以钢铁工业常用物料石灰和生产废料烧结机机头灰组成的混合型脱硫剂,在鞍钢建立的处理风量为5000 m~3/h的循环流化床脱硫装置上进行烧结烟气脱硫试验研究。
3.
A research was carried out on the desulfurization reagent made by lime that is common used in steel corporation and pulverized coal ash produced by steel corporation's fossil power plant, and a trial about the capability of the desulfurization reagent on the Ore sintering flue gas was done in the Angang's Circulating fluidized bed absorber tester.
本文研究了以钢铁企业常用物料活性石灰和自备电厂粉煤灰制备的脱硫剂，在鞍钢循环流化床脱硫试验装置上进行了烧结烟气脱硫性能试验。
5) sintering flue gas
烧结烟气
1.
Study on oxidation of calcium sulfate in the desulfurization ash of semi-dry sintering flue gas
半干法烧结烟气脱硫灰中亚硫酸钙氧化研究
2.
Based on desulphurization of sintering flue gas in China and the conditions at a steel mill,the dense flow absorbers for sintering flue gas desulphurization(DFA-FGD) were designed for two sintering machines of 52 m2 and 68 m2.
讨论了烧结烟气的工况与密相塔脱硫的工艺及特点,通过中试,研究了影响脱硫率的主要因素,确定了优化参数,验证了密相塔搅拌器的作用。
3.
A spray tower was built,and experiment was carried out on desulfurization of sintering flue gas with coking wastewater.
建立逆向气液喷淋反应塔,利用焦化废水进行烧结烟气脱硫试验研究。
6) lead-sintering gas
铅烧结烟气
1.
This paper also provides suggestion on raising SO2 concentrate of lead-sintering gas.
针对水口山矿务局铅冶炼烟气治理 ,将国内外的炼铅工艺进行了分析比较 ,论证了鼓风烧结 -鼓风炉熔炼流程目前是治理水口山铅冶炼污染的最佳技术方案 ,并对提高铅烧结烟气SO2 浓度提出了看法。
补充资料：130m~(2)带式烧结机(攀钢)
130m~(2)带式烧结机(攀钢)
130m2带式烧结机(攀钢)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条