2) melting slag detachability
熔渣脱渣性
3) slag detachability
脱渣性
1.
Effect of interactions among coating components on slag detachability of stainless steel electrode;
药皮辅料的交互作用对不锈钢焊条脱渣性的影响
2.
Study on the slag detachability of stainless steel electrode based on uniform design method;
基于均匀设计方法研究不锈钢焊条的脱渣性
3.
Effects of different shielding gases on slag detachability of type 347L flux-cored wire for stainless steels containing Nb;
保护气体对含铌不锈钢药芯焊丝347L脱渣性的影响
4) Slag resistance
抗渣性
1.
Slag resistance of Al_2O_3-spinel-SiC-C based castable;
Al_2O_3-MA-SiC-C质浇注料的抗渣性能
2.
Effect of matrix composition on slag resistance of alumina-magnesia castable;
基质组成对铝镁浇注料抗渣性能的影响
5) Slag resistance
抗渣性能
1.
Slag resistance of MgO-SiC-C composite;
MgO-SiC-C材料的抗渣性能研究
2.
The slag resistance of magnesia castable without Sialon and with 5% bauxite-based β-Sialon was studied by revolution dipping meth-od at 1 600℃ for 10,15,20 and 25 minutes.
采用中频感应炉进行旋转浸渍法抗渣实验,研究了未加入和加入5%矾土基β-Sialon镁质浇注料在1600℃不同浸渍时间(分别为10,15,20,25min)条件下的抗渣性能。
3.
The influence of Al2O3-SiO2 gel powder addition on permanent linear change,apparent porosity,cold crushing strength and slag resistance of Al2O3-MgO based castable was studied.
以电熔白刚玉和电熔镁砂为原料,以铝硅凝胶粉为结合剂制备Al2O3-MgO浇注料,研究铝硅凝胶粉加入量对Al2O3-MgO质浇注料线变化率、显气孔率、耐压强度和高温抗渣性能的影响。
6) slagging characteristic
结渣特性
1.
Experimental study on the slagging characteristics of biomass briquette combustion equipment;
生物质成型燃料燃烧设备结渣特性试验研究
2.
The studies are carried out on the slagging characteristic of power coal through the index discriminance by measuring the slagging characteristic,the component of coal ash,the melting point of ash and the mechanism of slagging is analyzed according to the testing samples of Jiaozuo anthracite,Shanxi Hejin lean coal,Shanxi Hongdong 1/3 coking coal,Jiyuan coking coal,Shanxi Yulin long flame coal.
通过对焦作无烟煤、山西河津瘦煤、山西洪洞1/3焦煤、济源焦煤、陕西榆林长焰煤五种煤样的结渣特性、煤灰成分、煤灰灰熔点的测定,运用指数判别法研究了煤的结渣特性。
3.
According to test and investigation,we found the slagging characteristics of biomass briquette hot-blast stove,and analyzed as well as concluded the slagging process and its influential factors of biomass briquette hot-blast stove,further,the author concluded slagging genesis of biomass .
采用生物质成型燃料热风炉,分别进行了炉膛温度、燃料层厚度、燃料粒径和过量空气系数等对结渣率影响的试验,根据试验与观察,得出了生物质成型燃料热风炉的结渣特性,并分析总结了生物质成型燃料热风炉的结渣成因、过程及结渣影响因素。
补充资料：成渣性
分子式：
分子量：
CAS号：
性质：煤或焦炭在制气或燃烧过程中形成炉渣的性能。与炉渣的熔点有密切的关系。决定于炉渣中主要成分的比值，比值愈大，熔点愈高。熔点低于1200℃的可认为是易熔炉渣，在1200~1350℃的是可熔炉渣，在1350-1500℃的是高熔点炉渣（灰分）。易熔炉渣会在炉栅上形成堵塞现象，使制气或燃烧过程发生困难。
分子量：
CAS号：
性质：煤或焦炭在制气或燃烧过程中形成炉渣的性能。与炉渣的熔点有密切的关系。决定于炉渣中主要成分的比值，比值愈大，熔点愈高。熔点低于1200℃的可认为是易熔炉渣，在1200~1350℃的是可熔炉渣，在1350-1500℃的是高熔点炉渣（灰分）。易熔炉渣会在炉栅上形成堵塞现象，使制气或燃烧过程发生困难。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条