说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 聚四氟乙烯加热器
1)  Teflon heater
聚四氟乙烯加热器
2)  PTFE heat exchanger
聚四氟乙烯换热器
1.
Study on the coefficient of PTFE heat exchangers and refrigerator, using the theory calculation and experimental methods.
本文通过实验,研究了塑料管溴化锂吸收式制冷机中聚四氟乙烯换热器的传热性能及制冷机组性能。
3)  PTFE
聚四氟乙烯
1.
Fabrication and Wear Property of Electroless Co-P-PTFE Composite Coatings;
钴、磷、聚四氟乙烯复合镀层性能研究
2.
DAMAGE ANALYSES OF PTFE LINING IN CRUDE DISTILLATION COLUMN;
粗馏塔釜聚四氟乙烯衬里的破坏分析
3.
Analysis of Causes Leading to Destruction of PTFE lining in Coarse Fractionating Tower;
粗馏塔聚四氟乙烯衬里的破坏分析
4)  teflon [英]['teflɔn]  [美]['tɛf'lɑn]
聚四氟乙烯
1.
Build-up spiral pipe condenser made of glass lining and teflon;
搪玻璃聚四氟乙烯组合盘管冷凝器
2.
The serviceability and development of teflon used as lubricant additive;
聚四氟乙烯润滑添加剂的使用性能与发展
3.
This paper analyzes the main causes of corrosion on boilers' gas pipelines,puts forth the measure of teflon-steel coated thermoplastic inner-cased pipe,which was implemented.
分析了造成锅炉煤气管道系统腐蚀的主要原因,提出并实施了采用聚四氟乙烯钢覆热滚塑内衬管道的解决办法。
5)  polytetrafluoroethylene [英][,pɔli,tetrə,fluərə'eθili:n]  [美][,pɑli,tɛtrə,flʊro'ɛθə,lin, -,flɔr-, -,flor-]
聚四氟乙烯
1.
Effects of Fillers on the Tribological Properties of Polytetrafluoroethylene Based Composites;
填充材料对聚四氟乙烯基复合材料摩擦学特性的影响
2.
Main Moulding Products of Polytetrafluoroethylene and Their Processing Technology;
聚四氟乙烯主要成型制品及生产工艺
3.
Preparation of stretching porous polytetrafluoroethylene membrane;
聚四氟乙烯拉伸微孔膜的制备
6)  poly(tetrafluoroethylene)
聚四氟乙烯
1.
In this paper,the surface modification ways of poly(tetrafluoroethylene) were introduced.
本文介绍了各种聚四氟乙烯PTEE膜的处理方法,以及国外近几年来采用的新方法。
2.
Polyvinylidene fluoride (PVDF) and poly(tetrafluoroethylene) (PTFE) possess excellent chemical stability and mechanical properties, they has good resistant to heat, cold, radiation and chemical corrosion and widely used as excellent membrane materials in industry for a long time, but they both have strong hydrophobicity which can cause the pollution of the membranes.
聚偏氟乙烯(PVDF)和聚四氟乙烯(PTFE)材料具有优良的化学稳定性和机械性能,能耐热、耐寒、耐辐射和耐化学腐蚀,长期以来作为优良的膜材料广泛应用于工业生产当中,但二者均有极强的疏水性,应用过程中容易造成污染,造成水通量和分离效率下降,要制备pH值敏感型微孔膜需要对其进行改性,提高其亲水性。
补充资料:聚苯硫醚/聚四氟乙烯共混物
分子式:
CAS号:

性质:  PPS与FIFE经适当共混得到的新型高分子材料。具有优良的耐磨性和低摩擦系数,特别适合制作轴承。以PPS为主的此类共混物比单纯PPS有较高的韧性和耐腐蚀性,而以FIFE为主的此类共混物,例如含20%~40%PPS的FIFE,可提高FIFE的抗蠕变能力、压缩强度,并减少透气性,更适宜制成衬垫材料。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条