说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 模型/设备干涉
1)  model/facility interaction
模型/设备干涉
2)  interference model
干涉模型
1.
Therefore,a stress-strength interference model for the reliability calculation of rock mass under two-end truncated probability distribution was proposed with the help of distribution theories.
为此,借助理论分布,提出了两端截尾概率分布下围岩可靠度计算的应力—强度干涉模型。
2.
Through analyzing the interference model of stress-intensity,aiming at the characteristic of special electromagnetism of security components,the release reliability of special electromagnetism of security components was brought forward.
通过对应力—强度干涉模型的分析,针对安全部件专用电磁铁的特性,提出了安全部件专用电磁铁的释放可靠性理论。
3.
In the condition of assuming that stress and intensity obey normal distribution,the basic method of reliability design,stress-intensity interference model is discussed.
在假设应力和强度服从正态分布的条件下,讨论了零件可靠性设计的基本方法———应力-强度干涉模型及相关计算公式。
3)  equipment model
设备模型
1.
Taking the process of ion implantation as an example,the necessity of establishing an equipment model in process simulation is put forward.
以离子注入工艺为例 ,通过研究沟道效应对离子注入工艺的影响 ,提出了建立设备模型的必要性 ,并且编程加以实现 。
2.
In order to promote the improvement of this situation,it is necessary to establish an equipment model in process simulation.
以离子注入工艺为例 ,通过研究沟道效应对离子注入工艺的影响 ,提出了建立设备模型的必要性 ,并进行了离子注入设备模型的初步研
3.
A equipment model of ion implant which thinks over the channel effects is established in This paper and it displays ion implant process result on silicon chip with Visual Basic programming.
论文首先考虑沟道效应,建立了离子注入机的设备模型,用Visual Basic编程实现了硅片表面离子注入工艺结果的分布图。
4)  device model
设备模型
1.
This model is more secure than para-virtual device model based IOVM architecture.
该模型安全性优于基于IOVM架构的泛虚拟化设备模型。
2.
10,this paper introduces the device model of Linux 2.
6内核提供了统一的内核设备模型,能够更好地支持智能电源管理、热拔插和pnp,具有优良的适应性。
3.
The test resource description includes device model and adapter model and configuration model,all these models and the resource configuration are analyzed.
分析了测试资源描述的设备模型、适配器模型、系统配置模型以及测试系统资源配置过程,并在实践中进行了应用。
5)  mold equipment
模型设备
6)  interferometric phase model
干涉相位模型
补充资料:AutoCad 教你绘制三爪卡盘模型,借用四视图来建模型
小弟写教程纯粹表达的是建模思路,供初学者参考.任何物体的建摸都需要思路,只有思路多,模型也就水到渠成.ok废话就不说了.建议使用1024X768分辨率

开始
先看下最终效果




第一步,如图所示将窗口分为四个视图




第二步,依次选择每个窗口,在分别输入各自己的视图




第三步,建立ucs重新建立世界坐标体系,捕捉三点来确定各自的ucs如图




第四步,初步大致建立基本模型.可以在主视图建立两个不同的圆,在用ext拉升,在用差集运算.如图:




第五步:关键一步,在此的我思路是.先画出卡爪的基本投影,在把他进行面域,在进行拉升高度分别是10,20,30曾t形状.如图:




第六步:画出螺栓的初步形状.如图




第七步:利用ext拉升圆,在拉升内六边形.注意拉升六边行时方向与拉升圆的方向是相反的.
之后在利用差集运算





第八步:将所得内螺栓模型分别复制到卡爪上,在利用三个视图调到与卡爪的中心对称.效果如图红色的是螺栓,最后是差集




第九步:阵列




第10步.模型就完成了




来一张利用矢量处理的图片


说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条