说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 橡胶塑炼
1)  mastication of rubber
橡胶塑炼
2)  twin-screw rubber plasticator
橡胶双螺杆塑炼机
1.
This thesis proposed twin-screw rubber plasticator is to solve the continuous for massive rubber plastication, and be extruded in the shape of flake, continuous to provide stable and high quality of plasticating rubber for continuous mixing.
本课题所提出的橡胶双螺杆塑炼机就是为了实现块状胶料的连续塑炼,并以片状的形状挤出,进而为块状橡胶的连续混炼提供稳定、连续、高质量的塑炼胶。
3)  rubber mixing
橡胶混炼
1.
Thus, this method realizes the full automatic optimizing in rubber mixing process by computer real time control.
首先研究了以橡胶混炼工艺参数为因素,采用区间划分因素的水平,自动确立优化目标和需优化因素的方法。
2.
The instantaneous power control and the MGKJ control system are used to realize the intelectual facultiescontrolled rubber mixing process on single internal mixer including automatic measurement of mix quality on line and automatic optimization of mixing process.
论述了密炼机橡胶混炼工艺智能控制的重要性:自动控制只有智能化才能确保混炼工艺优良,产品质量合格;指出了智能控制的条件、内容和途径:采用瞬时功率控制法及其控制系统MGKJ可实现混炼胶质量自动在线检测和混炼工艺自动优化等单台密炼机混炼工艺的智能控制。
3.
The theory of the method of controlling instantaneous power on the mixing technology was composed of the mechanism of the rubber mixing process,the rheologic theory on the internal mixer,and the power curve in mixing process.
橡胶密炼机混炼工艺瞬时功率控制法的理论由3部分组成:橡胶混炼过程的机理、密炼机流变理论和混炼过程功率曲线。
4)  dead milled rubber,dead rolled rubber
过炼橡胶
5)  milled rubber
捏炼橡胶
6)  milled rubber
挠炼橡胶
补充资料:橡胶塑炼
分子式:
CAS号:

性质:借助热或机械功使橡胶软化为具有一定可塑性均匀物的过程。生胶因黏度过高或质地不均而难于混炼或制浆,塑炼是提高生胶可塑性和均匀性的作业。塑炼是在开炼机两辊筒间的剪切力或压出机螺杆旋转的剪切力作用下,使生胶分子链断裂,平均分子量降低,从而增大可塑度、柔软性和黏着性,此为机械塑炼。也可以在热、氧、塑解剂(易生成游离基的化合物)的作用下完成,此为化学塑炼。在机械塑炼的同时添加化学塑解剂,可节约塑炼时间及能耗约50%,效益显著。常用的塑解剂有五氯硫酚和二苯甲酰胺基二苯基二硫化物。天然橡胶、异戊橡胶及氯丁橡胶的塑炼效果较好,塑解剂的效果大,塑炼后黏性增大,收缩性小。丁苯橡胶,特别是丁腈橡胶,塑炼效果差。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条