说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 阳极氧化涂层
1)  anode oxidizing coating
阳极氧化涂层
2)  Oxide anode coatings
氧化物阳极涂层
3)  oxide-coated anode
氧化物涂层阳极
1.
The electrochemical behavior of Ti-based Pt–Ir– Ta–Sn oxide-coated anode in copper and nickel plating baths was studied.
采用极化曲线和循环伏安法研究了Ti基Pt–Ir–Ta–Sn氧化物涂层阳极在铜和镍电镀液中的电化学行为,并探讨了铝轮毂电镀前处理工艺、电镀添加剂、氯离子对其强化寿命的影响。
4)  metal oxide anode coating
金属氧化物涂层阳极
1.
On the first time, the metal oxide anode coating with gradient constitution was prepared on the design of functionally gradient material in this paper.
首次用梯度功能材料设计思想制成了成份呈梯度分布的金属氧化物涂层阳极 (DSA) ,比用传统方法制备的阳极寿命提高了 40多倍 ,并用SEM、EDX对其界面过渡的形貌及成份分布进行了研究。
5)  Ru-Ti-Ir oxide anode coating
Ru-Ti-Ir氧化物阳极涂层
6)  anodic oxide layer
阳极氧化层
1.
The characteristics of the deuterium absorption and desorption of the titanium films covered with the Pd films and the anodic oxide layers are investigated on the measure system of the parameters of the thermodynam- ics and kinetics of metal hydrides.
在金属氢化物热力学和动力学参数测试系统上分别对表面覆盖Pd膜的钛膜和表面有阳极氧化层的钛膜进行了吸附和解吸氚特性的研究,吸附氘气的研究包括恒温吸氘和变温吸氘。
2.
The reaction rate for the deuterium absorption of titanium and titanium with anodic oxide layer in a constant volume system are measured in the temperature range of 475 to 680℃.
应用反应速率分析方法,测定了钛片和表面有阳极氧化层的钛片在恒容体系和475~680℃下的吸氘反应速率常数,得到钛片和有阳极氧化层的钛片吸氘的活化能分别为112±2 kJ/mol和187±3 kJ/mol;钛表面氧化层越厚,表观活化能越大;实验证明氧化层具有阻氘性能。
3.
The deuterium thermal desorption behavior of titanium deuteride with or without anodic oxide layer on the surface in a constant volume system has been investigated in the temperature range of 600℃ to 800℃.
应用反应速率分析方法,测定了氘化钛和表面有阳极氧化层的氘化钛在恒容体系和600-800℃范围内的热解吸反应速率常数,得到氘化钛和阳极氧化的氘化钛热解吸氘的活化能分别为(24。
补充资料:阳极氧化涂层
分子式:
CAS号:

性质:铝及铝合金(铝镁、铝铜合金)通过阳极氧化工艺处理而在其表面形成的氧化膜层。阳极氧化工艺可以改变铝及铝合金表面的各种性能,如抗腐蚀、硬度、耐磨、光学、热辐射、绝缘和着色等性能,因而被广泛地用作保护涂层、装饰涂层、耐磨涂层、反光涂层、吸光涂层、辐射涂层、热控涂层、绝缘涂层、喷漆底层和电镀底层等。也可以对镁、铅、铍、钛、铊、钕、硅、锆和不锈钢等金属进行阳极氧化处理而在其表面形成氧化膜层,从而改善其表面性能。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条