说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 总传质单元高度
1)  height equivalent to an overall transfer unit
总传质单元高度
2)  height of mass transfer unit
传质单元高度
1.
In Φ50mm packed extraction columns,two extraction systems with different interfacial tensions,kerosene-benzoic acid-water and 30%TBP(kerosene)-acetic acid-water were chosen to examine the Hoxp(height of mass transfer unit based on plug flow and continuous flow) of this structured packing and Φ10mm Pall ring packing under various operation conditions.
在Φ50mm的填料萃取塔中,选用煤油–苯甲酸–水和30%TBP(煤油)–乙酸–水两种不同界面张力的物系,测定了该填料和Φ10mm的鲍尔环填料在不同操作条件下的表观传质单元高度。
2.
Results show that H oxp (height of mass transfer unit based on plug flow and continuous flow) of conjugate ring is bigger than that o.
在120的不锈钢填料塔中,以16共轭环塔填料为研究对象,分别选用正丁醇-丁二酸-水和30%TBP(磷酸三丁酯)的煤油-醋酸-水2种不同界面张力的体系进行试验,测定了该填料在不同两相流速下的表观传质单元高度,和相同条件下测定的同尺寸鲍尔环、拉西环和θ环作了比较,θ环的表观传质单元高度(Hoxp)比共轭环小,但共轭环的(Hoxp)分别比鲍尔环小16%,比拉西环小25%。
3.
InΦ50 mm packed extraction columns, two extraction systems with different interfacial tension, kerosene-benzoic acid-water and 30%TBP(kerosene)-acetic acid-water were chosen to examine the dispersed phase holdup fraction, flooding velosity, H_(oxp) (apparent height of mass transfer unit based on plug flow and continuous flow) of structured packi.
4 mmθ环填料在不同操作条件下的分散相存留分数、液泛速度和表观传质单元高度。
3)  height equivalent to mass transfer unit
传质单元等高度
4)  height of backmixing unit
返混传质单元高度
5)  Apparent Height of Mass Transfer Unit(HTU)
表观传质单元高度
6)  number of overall transfer unit
总传质单元数
补充资料:总传质单元高度
分子式:
CAS号:

性质:以两相间总推动力为基础的传质单元称为总传质单元。若某一段填料层(或其他形式的微分接触式设备)进出口的浓度变化等于该段内两相间总推动力的平均值,则此段填料层的高度称为一个总传质单元高度。它要与推动力中组成的表示法相适应,若推动力的单位采用表示气相组成的单位(例如分压单位),则此高度称为气相总传质单元高度。在传质中它与气相总传质系数的关系为HOG=G/KGap。同样,若推动力的单位采用液相组成,则称为液相总传质单元高度。HOL=L/KLaC。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条