1) skin crack,surface crack,surface flaw
表面裂纹，表皮开裂
2) surface-breaking tilted cracks
表面开口斜裂纹
1.
In this paper,the two-dimensional finite element model of surface-breaking tilted cracks is built,and the Sarmar Absorbing boundary condition is applied in this model.
文章建立了含表面开口斜裂纹的二维有限元模型,在模型中引入Sarmar吸收边界,对脉冲超声表面波的激发、传播和在斜裂纹处的散射进行了分析,并利用频谱法对斜裂纹深度测量进行了数值模拟。
3) surface crack
表面裂纹
1.
Preventive to surface crack of MB15 magnesium alloy Φ482 mm ingot;
MB15镁合金Φ482mm铸锭表面裂纹的预防措施
2.
Surface Cracks in TP2 Copper Tube Billets in Horizontal Continuous Casting;
TP2铜管坯水平连铸表面裂纹研究
3.
An Analysis on Surface Cracks Formation of H Beam of Nb-V Microalloying Steel BS55C;
Nb-V微合金化H型钢BS55C表面裂纹成因分析
4) surface flaw
表面裂纹
1.
The surface flaws of different sizes were introduced into SiC/BN laminated ceramics by Vickers indentation method.
采用压痕法在SiC/BN层状陶瓷试样的表面引入不同尺寸的表面裂纹,利用三点弯曲测量含裂纹试样的极限断裂应力,研究了不同尺寸的表面裂纹对层状陶瓷断裂强度的影响;根据压痕载荷-强度实验结果,测定层状陶瓷的阻力曲线,并与单相SiC陶瓷对比。
5) Surface cracks
表面裂纹
1.
Analysis of reasons for surface cracks of 42CrMo spindle;
42CrMo主轴表面裂纹形成原因的分析
2.
The cause of surface cracks of the propylene spherical tank was analyzed comprehensively.
分析了球罐产生表面裂纹的原因 ,选择合适修复方案 ,对该球罐进行了修复。
3.
Surface cracks have a very complicated stress state To give the safety of device with cracks is very difficult by normal method of stress analysis This article makes a crack adjudhement with the code of CVDA-84 to the surface cracks in the balled vessel which was inspected in 199
依据ＣＡＤＡ－８４对云南沾益化肥厂３＃液氨球罐１９９６年５月检验出的表面裂纹作出了缺陷评定
6) surface/subsurface crack
表面/亚表面裂纹
1.
The generating and propagating mechanism of surface/subsurface crack and residual stress were discussed.
讨论了表面/亚表面裂纹和残余应力产生的原因及扩展机理,探讨了控制陶瓷磨削表面/亚表面损伤的途径,并指出了当前存在的问题及今后需要努力地方向。
补充资料：表面裂纹
分子式：
CAS号：
性质：指暴露在容器或构件表面的裂纹，通常以半椭圆形为代表，其中长轴表示裂纹长度，半短轴代表裂纹深度。
CAS号：
性质：指暴露在容器或构件表面的裂纹，通常以半椭圆形为代表，其中长轴表示裂纹长度，半短轴代表裂纹深度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条