1) individual connector
单线接头
2) HALF UNION
单头活接头
3) lug
[英][lʌɡ] [美][lʌg]
单耳接头
1.
Load response and failure modes of 3-d braided composite lugs were studied experimentally.
单耳接头试样采用RTM(Resin Transfer Molding树脂传递模塑)工艺制成,重点研究了由3种编织工艺(三维四向、三维五向和三维六向)、2种连接孔加工方式(机械钻孔和编织孔)、2种几何外形所组成的10组三维编织复合材料单耳承力接头的破坏机理与破坏载荷。
2.
The analysis of load response and failure modes of three-dimensional braided composite lugs is a complex work.
基于三维五向编织复合材料编织参数与结构几何参数之间的关系,采用复合材料细观力学的方法计算了三维五向编织复合材料的工程弹性常数,并且利用ANSYS商用软件编写数值分析程序,计算了轴向拉伸下两种几何尺寸的三维五向编织复合材料单耳接头在Yamada-Sun强度准则下的破坏载荷,计算结果与实验数据得到很好的吻合,可以认为该模型和失效准则能够较好地预测三维五向编织复合材料单耳接头轴向拉伸下的承载能力。
4) single-lap joint
单搭接头
1.
The stress and stiffness models of a single-lap joint are developed based on the linear elasticity theory considering the adherend shear deformations.
应力模型中的正应力和剪应力与有限元解吻合得较好,证明理论模型正确,参数研究中确定了影响胶焊单搭接头应力分布特征的关键耦合参数。
2.
Shear experiments of three types of single-lap composite joints,processed respectively by using RTM,stitched RTM and adhesively bonded techniques,are carried out to investigate the influences of process on mechanical properties of composite single-lap joint and failure mechanism is discussed from experimental observation.
在常温和湿热高温的环境下,分别进行了三种不同的成型工艺(RTM、引入缝纫的RTM和胶接)制备的单搭接头的剪切强度实验,研究了成型工艺对单搭接头的剪切强度的影响,并根据实验现象分析了单搭接头的剪切破坏机理。
3.
Shearing experiments were carried out to investigate mechanical properties of composite single-lap joints,processed by using the RTM techniques,and failure mechanism was discussed from experimental observation.
在常温环境下,进行了RTM成型工艺制备的复合材料单搭接头的剪切强度实验,记录并处理了实验数据;根据实验现象分析了单搭接头的破坏机理;建立了RTM复合材料单搭接头的三维(3D)有限元模型,模拟了搭接头的拉伸剪切破坏过程,并预测了搭接头破坏位置与破坏载荷,预测结果与实验现象吻合良好。
5) single adapter
单接头
1.
Using single enzyme cutting and single adapter reaction system,linked by T 4 ligase,the linked product was obtained,which was used as the template.
通过利用单酶切和单接头连接体系,在T4连接酶作用下进行连接,以连接产物为模板,在选择引物和ExTaq聚合酶作用下进行PCR特异扩增,扩增产物用琼脂糖凝胶检测分析。
6) single-grip terminal
单夹接头
补充资料：单线态-单线态能量转移
分子式：
CAS号：
性质：处于电子激发单线态的能量给体，通过激发能的转移使能量受体处于激发单线态的过程。
CAS号：
性质：处于电子激发单线态的能量给体，通过激发能的转移使能量受体处于激发单线态的过程。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条