1) isoperm
['aisəupə:m]
等渗透率线
2) equivalent permeability
等效渗透率
1.
The resin flow behaviors in different gaps were studied by the unidirectional flow method together with the equivalent permeability tensor of flow path computed by two geometric models.
采用2种几何模型计算优先流道的等效渗透率张量,结合单向流动法研究不同缝隙宽度时树脂的流动行为,并进行充模过程仿真模拟,研究和预测边缘效应对充模流动的影响。
2.
Based on the theoretic model of equivalent permeability, the edge effects under the conditions of different fiber contents and gap widths were simulated and analyzed.
采用单向流动法研究了边缘效应对纤维预成型体渗透率及充模过程的影响,结合其等效渗透率的理论预测模型对不同纤维体积含量、不同缝隙宽度条件下的边缘效应进行了模拟与分析,提出了一边缘效应强弱的表征因子,并以一较复杂的模腔的充模过程为实例提出了对边缘效应的在线监控策略及处理方案。
3.
Based on the parallel and series principles and Darcy′s Law,the equivalent permeability of human respiratory system is developed by using fractal networks.
根据串联、并联网络原理和Darcy定律,建立了基于分形网络的呼吸系统等效渗透率计算模型。
3) effective permeability
等效渗透率
1.
In the coarse grid blocks, firstly the probability density function of permeability is calculated by statistical method, then the Dagan's integral equation is used to compute the effective permeability from the calculated probability density function of permeability, finally, the pressure is calculated by use of the effective permeability in all coarse.
在粗网格内先统计渗透率在粗化网格的概率分布,然后由渗透率积分方程利用渗透率在粗化网格中的概率分布计算粗化网格的等率渗透率,再利用等效渗透率计算粗化网格的压强分布。
2.
If there is no resource or sink in the coarse grid block, the numerical computing method of effective permeability of coarse grid blocks has been given,where the fluid flow rate is the same flowing through the coarse grid block as all fine grid blocks in the coarse grid.
在无源汇条件下,根据流过某一个横截面的流体流量等于流过这一横截面内所有精细网格的流体流量之和这一特点提出了粗化网格等效渗透率的计算方法。
3.
if there are not resource or sink in the coarse grid blocks,the 3D solution of the fine grid blocks has been obtained by solving 3D fluid equations in porous media with direct method,and then the effective permeability of coarse grid blocks has been computed by the 3D solutions.
本文提出了地下流体渗流问题的三维解粗化算法,在粗网格内流体压强分布用直接解法求解三维渗流方程,用这些解计算粗网格的等效渗透率,在流体流速大的区域仍采用精细网格的计算方法。
4) medium permeability
中等渗透率
5) permeability isopleth map
等渗透率图
补充资料：渗透率
分子式：
CAS号：
性质：液体以层流状态通过粉粒物形成填充层时，其渗透性能是不同的。如以渗透率K表示此性能，则。V0为液体的表观速度，m/s; μ为液体的黏度，kgf·s/m2；△P为粉粒层两端压强差，kgf·s/m2；L为粉粒层厚度，m；△P/L为压强梯度。
CAS号：
性质：液体以层流状态通过粉粒物形成填充层时，其渗透性能是不同的。如以渗透率K表示此性能，则。V0为液体的表观速度，m/s; μ为液体的黏度，kgf·s/m2；△P为粉粒层两端压强差，kgf·s/m2；L为粉粒层厚度，m；△P/L为压强梯度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条