1) electric (type) governor
电调速器
2) electronic governor
电子调速器
1.
Reliability design of electronic governor based on CAN bus;
基于CAN总线的电子调速器可靠性设计
2.
Principle and Application of Electronic Governor 2301A;
2301A电子调速器原理与应用初探
3.
The application of emulation technic in electronic governor performance testing;
仿真技术在电子调速器性能试验中的应用
3) electronic speed governor
电子调速器
1.
Design of electronic speed governor for diesel engine based on singlechip and fuzzy theory;
基于单片机模糊控制的船用柴油机电子调速器的设计
2.
The performance,usage and adjustment of EC5000 electronic speed governor;
EC5000型电子调速器性能、使用及调整
3.
A kind of high efficiency electronic speed governor ESD5500E;
一种高效电子调速器ESD5500E
4) electronic speed regulator
电子调速器
1.
Equipping 16V240ZJD engine with 723 PLUS electronic speed regulator;
723PLUS电子调速器在16V240ZJD型柴油机上的应用
2.
Study on electronic speed regulator used in gasoline generating set;
汽油发电机组电子调速器研究
3.
Analytic method is used to establish the mathematical model of the S1A-02 gas turbine,and the mathematical model of the improved electronic speed regulator of the gas turbine is also established on the basis of the analysis of the speed adjustment developed circuit.
采用解析法建立了S1A-02燃气轮机的数学模型,同时在分析转速调节电路原理的基础上,建立了该型燃气轮机的改装后电子调速器的数学模型。
5) electric governor
电子调速器
1.
In this paper the PID control mathematical model for diesel electric governor and the principle of self modification for PID parameters fuzzy are described.
阐明了柴油机电子调速器采用PID控制的数学模型和PID参数模糊自校正的原理 。
2.
In this paper the fundamental of simulating test device for matching the electric governor with diesel engine and its system design are described.
简要介绍了柴油机电子调速器配机模拟试验装置的基本工作原理及其系统的设计 。
3.
Hardware, software, functions, controlled parameters, features, controlling process parameters and maintenance notices of electric governor are described based on an example of how to control s.
电子调速器由于采用数字控制技术 ,可以实现对大型汽轮机组转速及相关量的过程控制。
6) Digital governor
电子调速器
1.
Design and Simulation of Fuzzy Self-Adjusting PID Parameters of Digital Governor for Diesel Engine Based on Matlab/Fuzzy Logic Toolbox;
利用Matlab/Fuzzy Logic进行柴油机电子调速器PID参数模糊自整定设计与仿真
2.
Based on the research project "SPC-33 digital governor computer aided analysis system", this paper realizes the digital governor, which has been fixed in newly built vessels in our country fault analysis and diagnosis with computer and simulates the SPC-33 digital governor control panel and speed control system by adopted the FTA analysis theory and computer based simulation.
本文结合中远集团科研项目《SPC-33电子调速器计算机辅助分析系统》，对我国近几年在新建船舶中采用的SPC-33电子调速器，运用FTA故障树分析理论及计算机仿真，实现电子调速器故障计算机分析和诊断，并对调速器操作面板和转速控制系统进行仿真。
补充资料：厂用电受电
厂用电受电
energizing of auxiliary power system
chongyongd一on sho一Jd一on厂用电受电(energizing of auxiliary powersystem)机组附属设备安装完毕后需通电试运行，所需厂用电源由外部供给，因此厂用电受电是调试工作开始的标志。 受电步骤新建电厂先由电力系统向变电站供电，再依次对高压起动/备用变压器、3~10kv厂用配电装置、厂用工作变压器及380V配电装置供电。扩建电厂因高压起动/备用变压器已经投人运行，故可利用它的电源对扩建的厂用配电装置等供电。 调试项目主要有:①用额定电压依次对空载线路、变电站母线、隔离开关、断瘩器、互感器、变压器及厂用配电装置等进行冲击合闸试验。有条件时.冲击合闸前应先进行递升加压试验。升压过程中注意检查各设备有无放电声及短路现象，发现问题及时处理后再进行升压。②检查三相电压应平衡，相序应正确，各段母线的相位彼此应一致。对配电装置供电时，有时会由于母线电容和与母线连接的电磁式电压互感器的电感相互作用而出现铁磁谐振，此时相电压升高，中性点明显位移。为消除谐振可在电压互感器的剩余电压绕组处并联电阻以去振。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条