1)  dust-proof machine
防尘式电机
2)  Dust prevention
防尘
1.
Author points out that intensifying management of ventilation, fire prevention and dust prevention is fundamental assurance of security production.
通过对孟南庄煤矿瓦斯爆炸事故原因的分析 ,总结出“一通三防”在煤矿安全生产中的重要性 ,指出只有抓好安全 ,加强现场通风、防尘、防火等管理 ,才能确保煤矿安全生
2.
According to the air-defense project for both war and peace time in north area the design of ventilation system is discussed from four aspects: ventilation in water and transition period,dust prevention and noise control,which has a certain reference value for similar designers engaged in relevant area.
就北方地区一般用途的人防平战结合工程通风系统的设计 ,从供暖期及过渡季通风、排风口位置、防尘除尘、噪声控制四方面 ,提出了几点看法 ,以解决工程中遇到的环境问题。
3)  dust proof
防尘
1.
Application of dust proof and extinguish technology for π fall roof working surface by injecting water and high pressure,drilling in two tunnels and spraying of MgCI2 to soft ect.
论述了π放工作面高压注水,两巷道打孔注水,工作面软帮喷洒阻化剂MgCI2,等防尘、防火技术的应用。
2.
It may complete such tasks as decontamination,polishing,waxing and dust proof synchronously,its technology targets have reached the advanced leve of import product.
多功能有机硅蜡乳的制备工艺简单、造价低廉、使用方便 ,广泛用作车辆、家俱、设备表面的清洁护理剂 ,能集去污、上光、打蜡、防尘于一体 ,一次同步完成。
4)  dust-proof
防尘
1.
A new dust-proof assembly of mandrels of cots of combing and doubling machines is invented with patented no.
分析了A201系列精梳机分离胶辊芯轴及套筒的密封缺陷,指出其影响精梳半成品质量稳定和胶辊使用寿命,提出新型精梳、并条机胶辊芯轴防尘密封结合件(发明专利号:200520103347。
2.
This essay makes an introduction to the design of the multiple lip-type seal ring s sizes, the points to be noted in the ring s molding process and the test of the ring s dust-proof ability as well as operational life-span.
介绍了多唇密封圈主要尺寸设计、注塑模具注意事项,以及防尘和寿命试验等。
5)  dustproof
防尘
1.
Study of dustproof measures on belt conveying equipments;
皮带运输设备防尘措施的研究
2.
Design and application of dustproof and mobile workroom for noise control;
降噪防尘移动作业室的设计和应用
3.
According to the principle of waterflooding in coal seam,and based on the testing data,the water flooding in the shallow hole at the head of driving face will make the increase of water content of coal,and increase the power of molecule,and increase the effectiveness about dustproof.
根据煤层注水原理,以现场实测数据为基础,通过在掘进工作面迎头打浅孔向煤层注水,使煤的含水量增加,增加了分子间粘着力,增加了巷道的防尘效果,同时使煤的力学性质发生变化,塑性增强,硬度和强度降低,减少了煤体内部的应力集中和瓦斯放散的速度,从而造成煤层透气性增大、瓦斯充分释放、煤体瓦斯潜能降低,达到消突的作用。
6)  dust control
防尘
1.
The theoretical analyses and tests on the spot were conducted on tunneling working face dust control & ventilation in underground mines.
对巷道凿岩通风防尘进行了理论探讨和现场试验。
参考词条
补充资料:步进电机和交流伺服电机比较选择

【iEicn.com编者按】   步进电机是一种离散运动的装置,它和现代数字控制技术有着本质的联系。在目前国内的数字控制系统中,步进电机的应用十分广泛。随着全数字式交流伺服系统的出现,交流伺服电机也越来越多地应用于数字控制系统中。为了适应数字控制的发展趋势,运动控制系统中大多采用步进电机或全数字式交流伺服电机作为执行电动机。虽然两者在控制方式上相似(脉冲串和方向信号),但在使用性能和应用场合上存在着较大的差异。现就二者的使用性能作一比较。


1.控制精度不同



   两相混合式步进电机步距角一般为3.6°、 1.8°,五相混合式步进电机步距角一般为0.72 °、0.36°。也有一些高性能的步进电机步距角更小。如四通公司生产的一种用于慢走丝机床的步进电机,其步距角为0.09°;德国百格拉公司(BERGER LAHR)生产的三相混合式步进电机其步距角可通过拨码开关设置为1.8°、0.9°、0.72°、0.36°、0.18°、0.09°、0.072°、0.036°,兼容了两相和五相混合式步进电机的步距角。



   交流伺服电机的控制精度由电机轴后端的旋转编码器保证。以松下全数字式交流伺服电机为例,对于带标准2500线编码器的电机而言,由于驱动器内部采用了四倍频技术,其脉冲当量为360°/10000=0.036°。对于带17位编码器的电机而言,驱动器每接收217=131072个脉冲电机转一圈,即其脉冲当量为360°/131072=9.89秒。是步距角为1.8°的步进电机的脉冲当量的1/655。



   2.低频特性不同



   步进电机在低速时易出现低频振动现象。振动频率与负载情况和驱动器性能有关,一般认为振动频率为电机空载起跳频率的一半。这种由步进电机的工作原理所决定的低频振动现象对于机器的正常运转非常不利。当步进电机工作在低速时,一般应采用阻尼技术来克服低频振动现象,比如在电机上加阻尼器,或驱动器上采用细分技术等。



   交流伺服电机运转非常平稳,即使在低速时也不会出现振动现象。交流伺服系统具有共振抑制功能,可涵盖机械的刚性不足,并且系统内部具有频率解析机能(FFT),可检测出机械的共振点,便于系统调整。



   3.矩频特性不同



   步进电机的输出力矩随转速升高而下降,且在较高转速时会急剧下降,所以其最高工作转速一般在300~600RPM。交流伺服电机为恒力矩输出,即在其额定转速(一般为2000RPM或3000RPM)以内,都能输出额定转矩,在额定转速以上为恒功率输出。


说明:补充资料仅用于学习参考,请勿用于其它任何用途。