1) flash land
飞边桥
2) the bridge size of fash slot
飞边槽桥部尺寸
1.
Influence of the bridge size of fash slot on die forming;
飞边槽桥部尺寸对模锻成形的影响
3) burr
[英][bɜ:(r)] [美][bɝ]
飞边
1.
At the same time,burrs produced because of the high temperature and fluid pressure at the top layer of the workpiece.
针对厚板在搅拌摩擦焊接时下层金属焊接温度偏低、金属流动不畅、容易产生组织疏松或空洞,而上层金属因温度过高、流体压力过大而产生溢出和飞边等典型厚板焊接问题,从优化搅拌头结构的角度出发,设计出一种新型厚板焊接强力搅拌头。
2.
Aimed at the burring issues of occurring burring during injection manufacture of engineering material PPS, the material character as well as the problems required attention during mold design and the solving stops are analyzed in details.
针对工程材料PPS在注射生产中易出现飞边的问题,详细分析了材料特性及模具设计中应注意的问题及解决办法。
3.
The design technique and manufacture technology for a kind of multi-cavity,no-burr and round-section rubber sealing ring with multi-cavity and no-burr were introduced.
介绍了一种无飞边、多腔、圆截面橡胶密封圈压模的设计方法及制造技术,采用这种方法设计制造的模具结构简单、可靠 ,生产的产品质量良好。
4) flash
[英][flæʃ] [美][flæʃ]
飞边
1.
The Ways to Reduce the Flashes and Improve the Accuracy of Die castings;
减少飞边提高压铸件精度的途径吴卫黄志禄
2.
It is described briefly in this text how the flash is caused and how the flash is prevented in the die-casting process.
简述了在压铸过程中飞边产生的原因和相应的预防措施以及BP人工神经网络的基本原理和算法,利用BP人工神经网络来预测压铸件飞边的大小,从而达到优化于压铸模设计的目的。
3.
The various reasons which cause the flashes are analyzed during the process of high pressure die casting.
通过对压铸过程的分析 ,总结了产生飞边的各种原因 ,分析了刚度和热应力对产生飞边的影响 ,并提出了相应的预防措施。
5) super-line
桥边
1.
Previous surface trimming algorithms are usually based on general application field of surface trimming;while for special product design fields,such as garment design,toy design,super-lines and darts as special cutting lines were seldom treated.
以往的曲面切割区域自动搜索算法通常以一般的曲面切割应用领域为基础,对于特殊产品设计领域,如服装设计、布绒玩具设计中的桥边和省道没有作必要的处理。
6) Flash
[英][flæʃ] [美][flæʃ]
飞边，溢边
补充资料：成型飞边
分子式：
CAS号：
性质：塑料制品在模塑成型过程中溢至模具合模面缝隙间并留存在模塑件上的余料。飞边的大小与原料注入量及模具的密封程度有关，一般要求最大限度地减少飞边，避免浪费和减少模塑件修整工作量。
CAS号：
性质：塑料制品在模塑成型过程中溢至模具合模面缝隙间并留存在模塑件上的余料。飞边的大小与原料注入量及模具的密封程度有关，一般要求最大限度地减少飞边，避免浪费和减少模塑件修整工作量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条