说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 挤塑机分料板
1)  extruder breaker plate
挤塑机分料板
2)  plastic extruder
塑料挤出机
1.
The screw of twin-screw plastic extruder is complex,its structure and parameters determine extrusion process.
双螺杆塑料挤出机中的螺杆较为复杂,螺杆的结构和参数对挤出过程起决定作用。
2.
Up till now, plastic extruders operate independently.
目前生产中塑料挤出机均是独立运行,不能实时监测各设备的工作状态参数,也没有可供查阅的历史数据,产品质量的好坏完全取决于操作工人的熟练程度,这给管理带来很大弊端。
3.
It is shown by the instance of criticality analysis of plastic extruder that the proposed method is effective for evaluating the equipment criticality.
将其应用到塑料挤出机的重要度分析中,结果表明,该方法对设备重要度的确定是有效的和实用的。
3)  plastic extruding machine
塑料挤出机
1.
A temperature control system for plastic extruding machine based on Smith predicting balance theory is put forward, which adopts the PID control of the system temperature change, SCM(Single Chip Microprocessor) control technique, and the dual channel (heating/cooling)control method.
基于Smith预估补偿理论,结合系统升降温特点及数字PID调节、单片机控制技术,采用加热、冷却双通道控制的方法,设计了一种塑料挤出机温控系统。
2.
The principle and its primary parameters of the N8800 model dual channel (heating/cooling) intelligent digital temperature controller and its application on the temperature process,which is difficult to control due to attaching other heating sources, such as the process of plastic extruding machine, etc, were introduced briefly.
简要介绍了N 880 0型智能型双通道 (加热 /冷却 )自整定PID数字显示调节仪用于塑料挤出机等具有附加热源控制对象的基本原理和主要参
4)  bleed,material bleed
渗料(挤塑机)
5)  ram extruder
挤料杆式挤塑机
6)  plastic feeding extruder
塑料喂料挤压机
补充资料:聚甲基丙烯酸甲酯挤塑板
分子式:
CAS号:

性质:  用聚甲基丙烯酸甲酯模塑料经熔融挤塑制得的板材。模塑料通常是有较好流动性的、由甲基丙烯酸甲酯和少量丙烯酸酯(甲酯、乙酯)制得的共聚物。可分为挤塑平板、压花板、中空板、波纹板和共挤塑复合板。挤塑平板的主要性能和普通浇铸板相仿。复合板有PMMA/ABS等不同面层,耐溶剂、耐冲击、耐热。中空板是双层挤塑平板间带筋构成空间的异形板材,透光率可达83%,具有保温隔热特性。波纹板透光率可高达93%。模塑料熔融体经减压排气的机筒进入220~230℃的单螺杆挤塑机和230~240℃扁机模头挤出、压延、冷却、抛光、牵伸切割制成。可自动化连续作业,生产效率高,且板材长度不受限制。主要用途有广告标牌、灯具、装潢装饰、窗用和安全玻璃、家用器具、文体用品和农用温室材料等,应用十分广泛。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条