1) heat molding process
加热铸型法
2) heated mold
加热铸型
3) Lanz-pearlite process
铸型预热浇注法
4) T type probe method
"T"型加热法
5) heated-mold continuous casting
热型连铸
1.
Cu-Sn alloy wires were prepared by the "heated-mold continuous casting+cold deformation+ recrystalliza- tion annealing + cold deformation" technics.
通过"热型连铸法+冷拔+再结晶退火+冷拔"工艺制备的Cu-0。
2.
The contrast of heated-mold continuous casting of copper rod experiments on two different structural molds were carried out.
用两种结构铸型进行了热型连铸铜杆对比试验研究,结果表明,提高铸型温度梯度有利于稳定固液界面的位置,从而扩大热型连铸工艺参数配合的范围。
3.
By approprizte process parameters,the Al-1%Si alloy wire with good surface quality and unidirectional dendritic crystal was fabricated on the self-made horizontal heated-mold continuous casting equipment.
在自制的水平热型连铸设备上,采用一定的工艺参数,制备出了表面呈镜面,内部组织沿轴向定向排列的柱状晶Al-1%Si线材,其与金属型生产的多晶线材相比,屈服强度提高40%,伸长率提高35。
6) Heated mold continuous casting
热型连铸
1.
Research in mechanical properties of heated mold continuous casting Cu-Al-Be super-elastic alloy wires;
热型连铸Cu-Al-Be超弹性合金丝机械性能的初步研究
2.
The cold-working property of Cu-Al-Mn superelasticalloy cast by heated mold continuous casting;
热型连铸超弹性Cu-Al-Mn合金的冷加工性能
3.
Effects of Ti addition on grain growth of Cu-Al-Ni alloy cast by heated mold continuous casting process;
Ti对热型连铸Cu-Al-Ni合金晶粒长大的阻碍作用
补充资料：电容放电脉冲加热法
分子式：
CAS号：
性质：提高原子吸收石墨炉升温速率的方法。以电容放电供电方式，对石墨管原子化器供给瞬间大电流，进行脉冲加热，实现快速升温(100K/ms)。用各向异性热解石墨管产生等温条件。保证试样迅速原子化的技术。
CAS号：
性质：提高原子吸收石墨炉升温速率的方法。以电容放电供电方式，对石墨管原子化器供给瞬间大电流，进行脉冲加热，实现快速升温(100K/ms)。用各向异性热解石墨管产生等温条件。保证试样迅速原子化的技术。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条