1) accelerated service test
加速使用试验
2) service test
使用试验
1.
The results of bench test and service test for 3920 h in COSCO Guangzhou show that this oil has reliable quality and stability,and corresponding to the reference oils abroad.
台架试验和广州远洋运输公司3920h的使用试验表明:研制油品表现出可靠的使用性能和稳定性,总体性能与国外同类油品性能相当,可以满足90年代以后制造的低速二冲程十字头式船用发动机汽缸的润滑。
2.
Through laboratory simulation test evaluation,enlarging trial production and service tests in three electric power plants,the satisfied results have been obtained.
经实验室模拟试验评定 ,放大试生产 ,并在 3个电厂使用试验后 ,均获得满意结
3) Accelerated testing
加速试验
1.
METHODS According to the principles referring to the drug stability in the CHP and the standard of its quality,we carried out the stress testing,accelerated testing and long-term testing.
方法根据《中国药典》药物稳定性指导原则及乙酰谷酰胺氯化钠注射液的质量标准,对本品进行了影响因素试验、加速试验及长期试验。
2.
Accelerated life testing(ALT) and accelerated degradation testing(ADT) are two main kind of reliability accelerated testing technology.
加速寿命试验(ALT)、加速退化试验(ADT)是两种主要的加速试验技术,统计学界与可靠性工程界对加速寿命试验研究的关注较多,而对加速退化试验的相关理论研究与工程实践关注较少。
3.
Analyzing the general method of temperature screening for assembly in our country, combined with the experience of accelerated testing abroad, we proposed a definition method of parameters, such as temperature range, rate of change of temperature and dwell time.
分析了目前国内在组件温度筛选方面的一般做法,吸收国外加速试验的经验,并借鉴定量筛选中根据成效率确定无故障检验时间的方法,提出了组件温度筛选中各参数(如温度范围、温度变化速率、高低温保持时间和循环数)的确定方法,并以一种税控加油机主板的温度筛选为例,介绍了组件温度筛选方法研究中所总结的一些经验。
4) accelerated test
加速试验
1.
Effect of stray current on the dissoluble corrosion of Guangzhou metro engineering concrete by accelerated test;
杂散电流对广州地铁混凝土溶蚀性能影响的加速试验研究
2.
Method The influences of non-buffer and different buffers(phosphate buffer solution and Citrate buffer solution)on the stability of povidone-iodine gel were investigated by accelerated tests at 30 ℃and 40 ℃.
方法采用30℃和40℃加速试验考察无缓冲溶液和不同缓冲溶液(磷酸盐缓冲溶液,枸橼酸盐缓冲溶液)对聚维酮碘凝胶稳定性的影响。
3.
Methods The change of color, pH value, ingredients and the change of related materials were detected through the trials under the influence factors including sunlight, high and low temperatures and accelerated test which was done under specified conditions of constant temperatures of 40℃, 50℃, 60℃for 15 weeks as well as samples which were observed under room temperature.
方法通过光照、高温、低温等影响因素试验,特定条件(40,50,60℃)下恒温15周加速试验及室温留样观察,测定其色泽、pH、含量、有关物质变化。
5) accelerated tests
加速试验
1.
An investigation of the stress corrosion cracking resistance of high strength aluminum alloys 2A12 and 7A04 in different atmospheric environments were presented,results were compared with those obtained in laboratory accelerated tests.
利用C型环试样、单轴加载的拉伸试样和预制裂纹的试样研究了高强度铝合金在大气环境下的应力腐蚀性能,并与实验室加速试验结果进行对比。
补充资料：大气加速老化试验
分子式：
CAS号：
性质：又称大气加速老化试验。将胶黏剂胶接的试样置于能整天跟踪太阳的自动暴晒试验机上，使其始终受到比自然暴晒时强得多的光照，进行短时间试验后测定其性能变化。
CAS号：
性质：又称大气加速老化试验。将胶黏剂胶接的试样置于能整天跟踪太阳的自动暴晒试验机上，使其始终受到比自然暴晒时强得多的光照，进行短时间试验后测定其性能变化。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条