说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 抗变形力<冶>
1)  resistance of deformation
抗变形力<冶>
2)  resistance of deformation
变形抗力
1.
Results showed that high temperature resistance of deformation of 4Cr13 is not changed by adding copper and sulphur.
研究表明,铜、硫的加入未引起4Cr13钢变形抗力的改变。
2.
The curve of stress-strain of Q345 is found and then the resistance of deformation is obtained in different conditions when σ-(0.
2作为材料的屈服极限值,得到不同条件下的变形抗力值。
3)  flow stress
变形抗力
1.
A Dynamic Recovery Model for Flow Stress of Microalloyed Steel Produced by Compact Strip Production Process
CSP微合金钢变形抗力动态回复模型
2.
On the basis of the data obtained from Cam Plastometer,an RBF neural network prediction model is established by Matlab neural network toolbox,which corresponds with the relationship between flow stress and chemistry elements,temperature,deformation strain and strain rate of carbon steel.
以凸轮式高速形变试验机得到的实验数据为基础,利用Matlab人工神经网络工具箱,建立了碳钢的变形抗力与其化学成分、变形温度、变形程度及变形速度对应关系的RBF神经网络预测模型。
3.
To improve the prediction accuracy of the flow stress,a hybrid model based on the Hybrid Least Squares Support Vector Machine(HLS-SVM) and Mathematical Models(MM) was proposed.
为提高变形抗力的预测精度,提出了一种基于混合最小二乘支持向量机和数学模型的组合方法。
4)  resistance to deformation
变形抗力
1.
The compressing deformation with different temperature,rate and extent is executed to 20MnSiv steel on Gleeb-1500 thermal simulating test machine,its model of resistance to deformation in high-temperature rolling got,its continuous cooling transformation curve drew up with twin-pass compression method.
在G leeb le-1500热模拟实验机上对20MnS iV钢进行不同变形温度、变形速度、变形程度的压缩变形,得到了该钢种高温轧制过程中的变形抗力模型,采用双道次压缩实验绘制了该钢种的连续冷却转变曲线。
2.
The resistance to deformation decreases with the rising temperature after 450℃.
结果表明,BZ 11准贝氏体钢在20~450℃的抗拉强度变化不大,超过450℃随着拉伸温度的升高变形抗力减少;在900℃拉伸时,准贝氏体钢变形抗力与20钢变形抗力相当,说明准贝氏体钢具有良好的高温变形能力。
5)  deformation resistance
变形抗力
1.
Effect of deformation parameters on the deformation resistance of AZ31 alloy;
变形参数对AZ31镁合金变形抗力的影响
2.
Experimental study of deformation resistance of TRIP800 steel;
TRIP800钢变形抗力的试验研究
3.
Effect of Hot Rolling Parameters on Deformation Resistance of Coarse-Grained Niobium Steel;
热轧参数对粗奥氏体晶粒铌钢变形抗力的影响
6)  Deformation Resistance
抗变形能力
1.
Strength and Deformation Resistance of EPC Coating;
气化模铸造涂料层强度及其对模样抗变形能力的研究
补充资料:变形力


变形力
deformation force

  b ianxinglj变形力(deformation foree)金属塑性加工过程中,运动工具对变形材料的作用力。如徽粗时的锤头压力尸(见图),轧制时的轧辊压力,拉拔时的夹钳拉力,挤压时挤压杆的压力。变形力是工作面上单位压力在工具运动方向上投影的总和: p二「。d尸eosa JF或尸二万FN兰 墩粗时的锤头压力尸、平均单位压力万及单位压力P式中尸为变形力;P为工作面上的单位压力;F为工作面积;a为单位压力与工具运动方向的夹角;FN为工作面在与工具运动方向垂直方向上的投影面积;万为在FN上的平均单位压力。 (陈家民)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条