1) idling frequency
空载频率
2) idling frequency
无效频率，空载频率
3) no-lad reversing frequency
空载转换频率
4) loading frequency
加载频率
1.
Experiments on strain pseudoelastic property of shape memory alloy(SMA) were carried out and the Influence of temperature,cyclic number and loading frequency on pseudoelastic property of SMA were investigated.
对形状记忆合金(Shape Memory Alloy,简称SMA)的超弹性特性进行了试验研究,得到了SMA的超弹性特性随环境温度、循环加载圈数以及加载频率等因素的变化规律,为进一步开发SMA被动阻尼器奠定了基础。
2.
The frequency of strain burst, the amplitude of strain bursts, B, and the shear stress drop, D, were discussed in terms of the applied strain amplitude and cyclic loading frequency.
研究了应变幅和加载频率对［123］Cu－16％Al单晶在循环形变中的应变突发行为的影响。
3.
Fatigue crack growth behavior of DZ17G at room temperature is studied at different testing conditions of loading direction and loading frequency.
研究了定向凝固高温合金ＤＺ１７Ｇ在不同加载取向及加载频率条件下的室温疲劳裂纹扩展行为。
5) load frequency
载荷频率
1.
Influence of load frequency and heat treatment on fatigue crack propagation rate of die-casting alloy AZ91HP;
载荷频率和热处理对压铸镁合金AZ91HP疲劳裂纹扩展速率的影响
2.
Three variables as temperature,load frequency and stress ratio are the critical parameters affecting fatigue crack growth behaviour in metallic material.
温度、载荷频率和应力比是影响材料疲劳裂纹扩展行为的主要因素。
3.
Analysis results with displacement load frequency of 0.
针对空气弹簧分析过程中所存在的气压载荷问题,采取多步分析的思路,基于离散求和法APDL编写胶囊容积计算宏,应用于空气弹簧的垂向和横向动态力学性能分析,得出了位移载荷频率分别为0。
6) load frequency
加载频率
1.
The results show that there are obvious relationships between the temperature response and the microscopic shape,furthermore,the stress level and the load frequency effect the change of the surface temperature.
研究结果表明:试样表面温度的变化与表面微观形貌的变化具有明显的相关性,并受应力水平及加载频率的影响,表面最高温升与加载频率呈线性关系;试样断口出现明显的裂纹扩展区和瞬断区,且随着应力水平及加载频率的增加而形成较大的瞬断区及较多的韧窝。
2.
The present paper examines the influence of load frequency on crack growth rate in titanium at elevated temperature and attempts to analyze this effect theoretically.
由于材料或环境的因素，加载频率对疲劳裂纹扩展速率将产生很大的影响以工业 Ｔｉ为对象，研究了中等温度环境下疲劳裂纹扩展性能及加载频率的影响，并用弹、粘塑性理论对其进行了理论上的探讨基于该理论导出的本构关系和利用有限元方法，对裂纹尖端的应力应变进行了分析结果表明，粘塑性应变范围和Ｊ积分范围可作为裂纹扩展的控制参数，能很好地反映加载频率对裂纹扩展的影
补充资料：频率计量(见时间频率计量)
频率计量(见时间频率计量)
frequency metrology: see time and frequency metrology
口n IQ liliang顷率频率计皿(f比quency metrolo盯) 计t。见时闰
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条