说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 冷激铸造
1)  chill casting
冷激铸造
2)  direct chill continuous casting
直接激冷铸造
3)  DC casting
直冷铸造
4)  freeze casting
冷冻铸造
5)  permanent mold casting
冷硬铸造
6)  chilled cast iron
冷激铸铁
1.
In order to eliminate the high content of ferrite structure in the outer layer with depth of 1 mm of the chilled cast iron camshaft produced in shell mould,an experiment with adding metal antimony into iron melt was conducted.
为消除用覆膜砂壳型铸造工艺生产的冷激铸铁凸轮轴主轴颈外表面1 mm左右深度内的大量铁素体组织,进行了在铁液中加入金属锑的试验,加入量(质量分数)分别为:0。
2.
The "black line" defect found on chilled cast iron camshafts was analyzed metallographically and found that the microstructure of defect zone consisted of pearlitic matrix and D-type graphite.
对冷激铸铁凸轮轴的"黑线"缺陷进行显微分析发现,缺陷区的基体组织为珠光体,石墨形态为枝晶点状石墨。
补充资料:多段冷激式固定床反应器
分子式:
CAS号:

性质: 是多段固定床反应器的一种类型,其特点是经过部分反应的反应物系与冷却介质直接混合而降温,然后进入下一段绝热催化床继续反应。如果冷却介质是冷原料气,则冷激后反应气体混合物的初始组成与原料气的组成相同,因此原料气冷激反应过程的平衡曲线和最佳温度曲线都不变,但冷激后关键组分的反应率降低。氨合成、甲醇合成等催化反应器大都采用多段原料气冷激式反应器。一氧化碳变换过程用水蒸气冷激,则冷激后反应混合物的初始组成与冷激前不同,因此冷激后平衡曲线及最佳温度曲线都相应而变,但关键组分的反应率没有变化。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条