1) sliver,staple
毛纱(由短玻璃纤维制成)
3) short glass fiber
短玻璃纤维
1.
GF/PP composite was reinforced by alkali short glass fiber,which was prepared by combing injection molding.
采用碱性短玻璃纤维增强PP,通过混合-注塑工艺制备玻璃纤维/PP复合材料,并较全面的研究了玻纤含量、长度、偶联剂类型与加入量对复合材料力学性能的影响。
2.
This experiment has prepared the compound material of fiber reinforced caoutchouc by using the dry compounding process with short glass fiber and C fiber,studied the impacts on tensile strength,elongation at break, tearing strength,Shaoshi strength due to the different fiber type and the addition,as well as compared the property of two kinds of fiber reinforced compound material.
采用了短玻璃纤维及C纤维干法混炼工艺制备了纤维增强天然橡胶复合材料,研究了纤维种类及添加量对其拉伸强度、断裂伸长率、撕裂强度、邵氏硬度的影响,并且就两种纤维增强的复合材料性能进行了对比。
4) short glass fiber
玻璃短纤维
1.
Experimental study on uniaxial time-dependent ratcheting of short glass fiber reinforced polyester resin matrix composites
玻璃短纤维增强树脂基复合材料的单轴时间相关棘轮行为实验研究
2.
The extrusion swelling behavior of the composites systems of chlorinated polyethylene (CPE )and short glass fiber (SGF) which were treated (T type ) or untreated (O type) with silane coupling agent were investigated , and were compared with those of composite system of CPE and glass microsphere (CMS) treated with silane coupling agent .
用毛细管流变仪研究了硅烷改性玻璃短纤维(T型SGF)填充氯化聚乙烯(CPE)复合体系的挤出胀大特性,并与未改性的玻璃短纤维(O型SGF)和硅烷改性的玻璃微珠(GMS)填充的CPE体系进行了比较。
3.
The morphology of capillary extrudate of chlorinated polyethylene (CPE) reinforced by short glass fiber (SGF) composites which were treated (Ttype )or untreated (O type ) with silane coupling agent were investigated by scanning electron micrography .
用扫描电镜研究了硅烷改性玻璃短纤维(T型SGF)填充氯化聚乙烯(CPE)复合体系及未改性玻璃短纤维(O型SGF)充CPE复合体系的毛细管挤出物形态,结果显示出剪切等流动因素对玻璃短纤维(SGF)的取向性和分散性有很大影响;不同SGF复合体系的界面状态不同,SGF分散情况也存在着较大差异;复合材料在毛细管流变仪中均存在着明显的旋转流动。
5) picking,down
(玻璃纤维的)穿纱
6) veil
[英][veɪl] [美][vel]
玻璃纤维面纱
补充资料：玻璃纤维增强聚甲基丙烯酸甲酯透明玻璃钢
分子式：
CAS号：
性质： 玻璃纤维增强的有机玻璃。具有好的机械强度，冲击强度可比普通有机玻璃高5～10倍，半透明、耐光耐候性优良。制法与铸型本体聚合制有机玻璃相似，在模具中每铺一层玻璃纤维，浇一层甲基丙烯酸甲酯预聚浆料，使其充分浸润，最后密封后加热固化脱模。主要用作建筑材料，如遮阳板等。
CAS号：
性质： 玻璃纤维增强的有机玻璃。具有好的机械强度，冲击强度可比普通有机玻璃高5～10倍，半透明、耐光耐候性优良。制法与铸型本体聚合制有机玻璃相似，在模具中每铺一层玻璃纤维，浇一层甲基丙烯酸甲酯预聚浆料，使其充分浸润，最后密封后加热固化脱模。主要用作建筑材料，如遮阳板等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条