说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 膨胀高温计
1)  expansion pyrometer
膨胀高温计
2)  high temperature dilatometer
高温热膨胀计
3)  dilatometric thermometer
膨胀温度计
4)  high temperature low-expansion glaze
高温低膨胀釉
1.
According to the cordierite brick service condition used at the burnt stove door,we choose the Li_2O-MgO-Al_2O_3-SiO_2 quaternary system as the cordierite brick high temperature low-expansion glaze.
以焦炉炉门堇青石衬砖的使用情况为依据,得出适合堇青石衬砖高温低膨胀釉的体系为Li_2O-MgO-Al_2O_3-SiO_2系。
5)  low expansion superalloy
低膨胀高温合金
1.
The microstructures of various kinds of grain boundary phases in low expansion superalloy Incoloy 907 have been investigated by high resolution electron microscopy(HREM) and high resolution image processing.
用高分辨透射电子显微术及高分辨图像处理技术对低膨胀高温合金Incoloy907晶界相作了分析研究,经图像处理后,清晰再现了907合金各种晶界相的高分辨像。
2.
A new low expansion superalloy named as GH6783 with a service temperature of 700℃ is introduced in this paper.
介绍了一种700℃使用的新型抗氧化低膨胀高温合金。
3.
The microstructure and mechanical properties of GH783 low expansion superalloy with oxidation resistance were studied using optical microscope and transmission electron microscope(TEM).
研究了抗氧化型低膨胀高温合金GH783的组织与性能。
6)  low thermal expansion superalloy
低膨胀高温合金
1.
The goal of this work lies in finding a way to develop a new low thermal expansion superalloy with lower thermal expansion coefficient and better mechanical and oxidation resistant properties.
本文针对低膨胀高温合金的性能缺点,以Thermo-Span合金为研究对象,通过适当降低Cr含量来降低热膨胀系数,提高Al含量来补偿降Cr引起的抗氧化性能下降,并提高γ′相的析出量和稳定性,通过加入微量元素磷和硼并配合热处理来强化晶界,改善抗缺口敏感性能,全面优化合金的性能。
补充资料:低膨胀高温合金
分子式:
CAS号:

性质:兼有低膨胀合金和高温合金特性的合金。典型的低膨胀合金是因瓦合金,其膨胀系数低,强度也低,高温强度更低。而低膨胀高温合金则在保持低膨胀系数的同时具有高强度,尤其是高温强度。如Incoloy 903合金膨胀系数低,从室温到650℃,平均膨胀系数为10.3×10-6/℃,弹性模量低且基本恒定,室温σb为1310MPa,650℃σb为1000MPa,达到一般高温合金的强度水平,但膨胀系数低一半。该合金有良好的冷热疲劳性能,由于不含铬,抗氧化性较差,但具有较高抗氢脆能力。另外还有低铝高铌的Incoloy 907合金和高硅的Incoloy 909合金,构成低膨胀高温合金系列。这种合金是用于高性能航空涡轮发动机主动间隙控制技术的关键材料,制作高压压气机机匣、涡轮内外环及封严环等部件。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条