2) wedge
[英][wedʒ] [美][wɛdʒ]
楔块
1.
Introduces structure and characteristic of the wedge type broken belt for uphill belt conveyor,analyses its drawback,and the protector is improved up.
介绍了楔块式上运带式输送机断带保护装置的结构和特点,分析了存在的缺陷,并对原有的断带保护装置进行了改进,设计了一种上闸块可摆动、可打开的新型楔块式断带保护装置;在输送带正常运转时,该新型断带保护装置左右上闸块可以摆动到输送带两侧,与输送带的纵向平行,当输送带发生断带时,能迅速地使得上闸块摆动到输送带上方,参与输送带制动。
2.
Analyses the importance of protection of belt broken for uphill belt conveyor,summarizes the technology of broken belt protection,emphatically introduces the eccentric roller type broken belt protector and the SPDB-Ⅰwedge type broken belt protector,analyses their design feature's and compares their performance.
分析了上运带式输送机断带保护的必要性,综述了现有的断带保护技术,着重介绍了偏心轮式和SPDB-Ⅰ型楔块式断带保护装置,分析了结构特点,并对其性能进行比较。
3) drift hole
楔孔
4) T-wedge
T形楔块
1.
Difficulties in design of injection mould with different side-concave structure were anˉalyzed,and then design points of two stage side core-pulling mechanism were proposed,including angular cam and angle guide pillar assembly,T-wedge and T-wedge assembly and T-wedge and angle guide pillar assembly.
现分析了塑件不同侧凹结构对注射模设计造成的困难,以及弯销—斜导柱组合、T形楔块—T形楔块组合和T形楔块—斜导柱组合的二级侧抽芯机构的设计要点,总结了塑件侧抽方向与模具开模方向的夹角大小对二级侧抽芯机构设计的影响,为复杂塑件成型模的设计开辟了新思路。
5) Wedge-action die
楔块模
6) center block
中心楔块
1.
Die forging techniques for the center block of high capacity draft gear;
大容量缓冲器中心楔块模锻工艺
2.
Hydrogen embrittlement fracture of 20CrMnMo steel center block carburized was analyzed in this paper.
对中心楔块渗碳导致的氢脆断裂现象进行了分析研究。
补充资料:钻孔(扩孔与铰孔)
各种零件的孔加工,除去一部分由车、镗、铣等机床完成外,很大一部分是由钳工利用钻床和钻孔工具(钻头、扩孔钻、铰刀等)完成的。钳工加工孔的方法一般指钻孔、扩孔和铰孔。
用钻头在实体材料上加工孔叫钻孔。在钻床上钻孔时,一般情况下,钻头应同时完成两个运动;主运动,即钻头绕轴线的旋转运动(切削运动);辅助运动,即钻头沿着轴线方向对着工件的直线运动(进给运动),钻孔时,主要由于钻头结构上存在的缺点,影响加工质量,加工精度一般在IT10级以下,表面粗糙度为Ra12.5μm左右、属粗加工。
一、钻床
常用的钻床有台式钻床、立式钻床和摇臂钻床三种,手电钻也是常用的钻孔工具。
1.台式钻床
简称台钻,是一种在工作台上作用的小型钻床,其钻孔直径一般在13mm以下。
台钻型号示例:Z 4 0 1 2
主 参 数:最大钻孔直径
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条