说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 旋转圆柱扫描器
1)  rotating cylinder scanner
旋转圆柱扫描器
2)  rotating scanner
旋转扫描器
3)  rotating mirror analyzer
旋转镜扫描器
4)  rotate scanning
旋转扫描
1.
The new display screen which is based on the principle of mechanic rotate scanning is designed.
依据机械转动旋转扫描的显示原理,提出了一种新型显示屏的设计方案。
5)  Rotated scanning
旋转扫描
1.
Simulation results show that comparing with long-side scanning,short-side scanning and sub-area scanning,the rotated scanning of rectangular part can greatly decrease temperature gradient in the begin point and the end point of the first scanning line,especially there is a positive temperature gradient in the end point which can avoid the temperature decreasing of the molten metal.
试验发现,长边、短边及分区扫描下起始边起点和终点均存在较大的温度梯度,旋转扫描不仅能有效降低起始点温度下降程度,而且终点还存在正的温度梯度,避免了起始边温度迅速下降;成形件旋转与反向扫描相结合较大地改善了成形件内部的温度分布均匀程度,降低了成形件由于热应力而产生的翘曲变形。
6)  rotating circular cylinder
旋转圆柱
1.
The flow around a rotating circular cylinder at Reynolds number Re=1000,200 and the angular to recti-linear speed ratio α∈(05,325) is studied numerically.
本文采用以修正的不完全LU分解作预处理器的共轭梯度法(MILU_CG),结合高阶隐式差分格式,改进了作者(1992)提出的基于区域分解、有限差分法与涡法杂交的数值方法(HDV)·系统地研究了雷诺数Re=1000,200,旋转速度比α∈(05,325)范围内,绕旋转圆柱从突然起动到充分发展,长时间内尾流旋涡结构和阻力、升力系数的变化规律·计算所得流线与实验流场显示相比,完全吻合·首次揭示了临界状态时的旋涡结构特性,并指出最佳升阻比就在该状态附近得
2.
A hybrid finite difference and vortex method, which is based on domain decomposition and proposed by the authors (1992), is used forcalculating the flow around a rotating circular cylinder at Reynoldsnumber Re=1 000 and the rotation velocity ratio a∈(0.
25)范围内,绕旋转圆柱从突然起动到充分发展,长时间内尾流旋涡结构和阻力、升力系数的变化规律。
3.
In this paper, the variable processes of the steady flow moving around rotating circular cylinder are visualized by the hydrogen bubble method with two cross wires.
本文对交叉布置的两根丝产生氢气泡的方法显示流谱作了探索,并对旋转圆柱绕流的变化过程进行了流谱显示。
补充资料:旋转-旋转式扫描系统


旋转-旋转式扫描系统


影像学术语。CT设备的类型之一。扫描方式为旋转-旋转式(rotate-rotate,R/R)的CT设备。扫描时X线管和排列成扇形的探测器阵列做同步旋转,属第三代CT机,可用于全身CT检查,是70年代后期以来临床应用的主流机型之一。X线管为旋转阳极,发射大角度扇形线束,探测器多为氙气电离室或为固体探测器,阵列规模通常在数百甚至上千。扫描时间1~4秒。通常具有靶扫描、靶重建、动态扫描、三维成像等特殊程序和多种重建算法、测量分析功能。旋转-旋转式设备在扫描过程中探测器是连续工作的,利用率高,但不能同时进行校准。所获取的每一幅投影轨迹剖面图都是由整个探测器阵列同时采集的信息构成的,个别探测器出现误差便可能使反投影后的重建图像上出现环形伪影(ring artifact)。该型机不具备体积采样能力。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条