说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 铟锡氧化层
1)  indium tin oxidized layer
铟锡氧化层
2)  indium tin oxide
氧化铟锡
1.
Several preparation methods of nano indium tin oxide powders in recent years are introduced.
介绍了近年来纳米氧化铟锡(ITO)粉末几种常用的制备方法,着重讨论了共沉淀法,溶胶-凝胶法,水热法等工艺,并比较了几种制备方法的优缺点。
2.
5TiO3 thin films used as insulating layer in thin film electroluminescent devices were prepared on indium tin oxide-coated Corning 1737 glass by radio frequency magnetron sputtering, and the effect of volume ratio of O2 to Ar+O2 V(O2)/V(Ar+O2) on deposition rate, crystallinity as well as dielectric properties of the Ba0.
采用射频磁控溅射法在镀氧化铟锡的Corning1737玻璃基片上制备了用于无机电致发光显示器绝缘层的Ba0。
3.
Indium tin oxide (ITO) thin films have been prepared by a sol-gel process using inorganic metal salts as raw materials.
 以无机盐为出发原料,采用溶胶 凝胶法制备了氧化铟锡(ITO)透明导电薄膜。
3)  ITO [英]['i:,təʊ]  [美]['i,to]
氧化铟锡
1.
Study on the wettability between ITO target and indium;
氧化铟锡靶与铟的润湿性研究
2.
Preparation of ITO nanoparticles and their composite films with infrared property
纳米氧化铟锡粉体的制备及其复合膜的红外性能研究
3.
ITO (In2O3: SnO2 or Tin oxide doped indium oxide) films with nicer conductance, high visible light transmittance and lager reflectance in infrared region have been increasingly used in a variety of applications, such as organic light emitting diodes (OLED), liquid crystals display (LCD), electroma.
ITO (Indium Tin Oxide,氧化铟锡)薄膜以其良好的电导率性能、在可见光范围内的高透射性能以及在红外区内的高反射性能,成为制作透明电极材料的新宠,被广泛地应用于制造液晶平板显示器(LCD)、等离子体显示器、电致发光显示器、太阳能电池、节能视窗、汽车防雾玻璃等,应用前景广阔。
4)  Indium Tin Oxide (ITO)
氧化铟锡
1.
Study on Transparent and Heat Insulating Coatings Prepared from Nanometered Indium Tin Oxide (ITO);
纳米氧化铟锡透明隔热涂料的制备及性能研究
5)  indium tin oxide
氧化锡铟
6)  Indium-tin oxide
氧化铟锡
1.
Indium-tin oxide (ITO) conductive film glass is a novel electrode material which has good conductivity and large surface area.
基于钯纳米粒子高吸附性、高比表面积、高电催化活性等特点,本论文主要通过循环扫描法制备出高电活性、高灵敏度的钯纳米修饰氧化铟锡(Pd NPs/ITO)电极,并将其应用于低碳醇(包括甲醇、乙醇、丙醇等)的电催化氧化研究中。
2.
The structural,optical and electrical properties of indium-tin oxide(ITO) thin film grown on inflexible glass and flexible polyethylene terephthalate(PET) substrates by magnetron sputtering method were investigated.
对采用磁控溅射方法生长在玻璃和柔性聚对苯二甲酸乙二醇酯(PET)塑料上的氧化铟锡(ITO)薄膜的结构、光学和电学特性进行了对比研究。
补充资料:银-氧化锡-氧化铟
分子式:
CAS号:

性质:银基含氧化锡(SnO2)和三氧化二铟(In2O3)的复合电接触材料,抗熔焊性和耐磨性能均良好。In2O3可改善电接触性能。如Ag-8SnO2-15In2O3的密度9.85~10.4g/cm3。布氏硬度785~1176.8MPa。电阻系数3.00~3.50×10-2Ω·mm2/m。用内氧化法制造。优良的中等负荷电接触材料,作断开电接点。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条